Author |
Message |
Robster618
| Posted on Monday, September 28, 2015 - 06:29 am: |
|
Trying to figure out how to put the headlight together. Anyone have and pictures of how the clips go on? |
Oldog
| Posted on Monday, September 28, 2015 - 12:14 pm: |
|
I can look later IIRC they go ends to the glass, I will look tonight. If some one can post up a photo of the back of an x1 headlight. |
Natexlh1000
| Posted on Monday, September 28, 2015 - 01:00 pm: |
|
You mean the clips that hold the glass onto the chrome ring? |
Akbuell
| Posted on Monday, September 28, 2015 - 02:30 pm: |
|
Checked a spare I have on the shelf. Orient the glass so the position light is at the bottom, in line with the lock screw. The unit I have has 8 clips, 4 on each side. Just install the wire clips so the open ends are under the lip on the back side of the chrome ring. Lap the clips one over the other. Hope this makes sense and helps, Dave |
|