Author |
Message |
2stang
| Posted on Tuesday, July 21, 2015 - 11:44 am: |
|
-Buell race front rotor, older design, has notches on I.D., 5mm thick. Has been tracked, but still runs true, will prep/de-glaze. ----$275 -Braking scalloped rear rotor, low miles, hardly any wear.----$75 -EBR front rotor mounting kit, used on above front rotor.-----$100 -EBR qucik release/dry front brake line.----$275 -ZTL2 front caliper with Vesrah VD-9038JL sintered pads, 70% of pad left.----$300 -CRG shorty brake lever, black, fits stock brake master.----$60 -CRG shorty clutch lever,black, fits stock clutch master.----$60 -Ohlins steering damper, complete, good shape.----$375 -Precision engineering billet rear brake pedal.----$50 -Precision engineering billet shifter.----$50 -Precision engineering billet heel guards.----$50 -Drummer SS slip-on, good shape, low miles. Tip is bent, will try to straighten before sale.----$500 -Power commander V with supposed custom map for Drummer slip-on. Never ran bike. Back of unit missing. Will connect to computer and verify map.----$ make offer -K&N 1125 air filter.----$25 -Showa race shock with Hypercoil 550 Lb/in spring. Just freshened, new seals and nitrogen recharge. Also comes with Showa 575 spring.----$650 -Ohlins TTX36 shock with 10.5 N/mm spring. Shock is in good shape, no leaks.----$850 Most of these parts came off a bike I'm parting out. All part conditions are based on what I see. I did not ride the bike. I've been a machinist and motorcycle mechanic for 10+ years, so my knowledge is high. I have a ton of stock parts available as well, including an engine. Engine has cracked swing arm pivot, so needs cases, but can part out. Thanks Joe |
2stang
| Posted on Wednesday, July 22, 2015 - 11:08 am: |
|
All PMs responded to! |
2stang
| Posted on Wednesday, July 22, 2015 - 01:13 pm: |
|
Ohlins damper, crg levers, and precision engineering parts sold! |
Shawns
| Posted on Wednesday, July 22, 2015 - 03:05 pm: |
|
May be interested in the rear rotor, could you post a pic? |
Theshinenz
| Posted on Wednesday, July 22, 2015 - 04:19 pm: |
|
What weight rider is ohlins set up for? |
Shawns
| Posted on Wednesday, July 22, 2015 - 05:07 pm: |
|
Could use a steering stem nut as well. |
2stang
| Posted on Wednesday, July 22, 2015 - 06:15 pm: |
|
Shawns- I'll snap a pic of the rotor and post it up tonight. I'll see if I have the other parts you PM'ed about as well. Theshinez- The spring on the Ohlins is rated for a rider 200-225. |
2stang
| Posted on Thursday, July 23, 2015 - 12:31 am: |
|
|
2stang
| Posted on Thursday, July 23, 2015 - 12:35 am: |
|
NEW PARTS ADDED Ilmberger keyless gas cap----$100 |
Nobuell
| Posted on Thursday, July 23, 2015 - 09:47 pm: |
|
Is the EBR quick release brake line available? |
2stang
| Posted on Thursday, July 23, 2015 - 11:38 pm: |
|
Yep, dry brake line still available. |
2stang
| Posted on Friday, July 24, 2015 - 11:13 am: |
|
Gas cap sold! |
Nobuell
| Posted on Friday, July 24, 2015 - 12:04 pm: |
|
PM Sent |
2stang
| Posted on Friday, July 24, 2015 - 12:49 pm: |
|
Nobuell, I PMed you this morning, but have not received and PMs from you. Email me direct at 234viper@live.com Thanks Joe |
Shawns
| Posted on Friday, July 24, 2015 - 11:04 pm: |
|
I am interested in the rotor and the other parts I PM'd ya about. What kind of rotor and stator setup does the busted engine have? (Message edited by Shawns on July 24, 2015) |
2stang
| Posted on Saturday, July 25, 2015 - 10:17 am: |
|
Shawns- I'll do $150 shipped for the rear rotor, starter, nut, and guard. PayPal is 234viper@live.com, to family and friends please. I haven't dug into the stator side of the broken engine yet. |
Shawns
| Posted on Saturday, July 25, 2015 - 10:54 am: |
|
Payment sent foe those items. Would be interested in the rotor/sprag assay and stator when you dive into it. Do you gave CR bars? |
2stang
| Posted on Saturday, July 25, 2015 - 11:23 am: |
|
Shawns- Got money! Will ship parts first thing Monday. No CR bars. |
2stang
| Posted on Monday, July 27, 2015 - 03:27 pm: |
|
Shawns- Your parts shipped today. You should see them Wednesday. |
Shawns
| Posted on Monday, July 27, 2015 - 05:21 pm: |
|
Danka |
Theshinenz
| Posted on Tuesday, July 28, 2015 - 03:04 am: |
|
can you email some pics of the shocks to me, theshinenz@gmail.com cheers Scott |
Theshinenz
| Posted on Tuesday, July 28, 2015 - 03:07 am: |
|
silly question but how do you get the bolts for the caliper in with that rotor? doesnt appear to be bolt holes etc? |
Nobuell
| Posted on Thursday, August 06, 2015 - 04:29 pm: |
|
I spun the bearing in my Mag track wheel. I am looking for a rear wheel to use as a spare for my rain tires. Does not have to be pretty. |
Theshinenz
| Posted on Thursday, August 06, 2015 - 07:57 pm: |
|
Looks like 2Stang has gone AWOL ? |
2stang
| Posted on Friday, August 07, 2015 - 04:51 pm: |
|
Im still here guys, been busy with racing and trackdays. Theshinenz- I take those pictures tonight. Nobuell- I do have a wheel. I'll post a picture tonight. |
Zac4mac
| Posted on Friday, August 07, 2015 - 10:11 pm: |
|
Is the dry brake line still on the table? If so Paypal is ready. Z |
Shawns
| Posted on Friday, August 07, 2015 - 11:08 pm: |
|
Check out the stator and rotor yet? Have any injectors and pressure switch from the motor? |
2stang
| Posted on Friday, August 07, 2015 - 11:23 pm: |
|
Z- Dry brake line sold, sorry |
2stang
| Posted on Friday, August 07, 2015 - 11:29 pm: |
|
|
Jeepinbueller
| Posted on Wednesday, August 12, 2015 - 01:03 pm: |
|
How the condition of the starter/sprag gear and housing on that engine, stang? Mine went up, though I'm still tearing the alternator side down to see what exactly is broken (try to start the bike and I hear the starter just spinning freely). Might take those off your hands if everything looks good! |
|