G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Russmannnn Posted on Tuesday, June 09, 2015 - 10:49 am:        I have a 2008 1125r with a 2009 Cluster and 2010 Motor. I went to the dealer to order a new switch but found out there is a longer switch and a shorter one. My question is does it matter which one I get or sense they are different sizes will only one fit? Also dose anyone know what size torx bolt it takes to take off the switch? Thanks for the help Russell   Redponcho Posted on Tuesday, June 09, 2015 - 01:03 pm:        The short one is for an 1125R. The long one is for a CR. I will dig out the bolts for the torx size but be aware it takes a special one with a hole in it.   Froggy Posted on Tuesday, June 09, 2015 - 01:34 pm:        The mounting is different between the R and CR ignitions, which is why they have different part numbers. The two bolts holding it in are security torx, size 45 if I recall correctly. American Sport Bike sells a tool for it, as do most hardware stores.   Russmannnn Posted on Tuesday, June 09, 2015 - 03:40 pm:        Sounds perfect thanks!!!

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: