G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Ceefuhs Posted on Monday, June 08, 2015 - 09:41 am:        The PO reworked the wiring to the tail light on my '96 S1. The light only comes on when the rear brake is applied. It should be on whenever the key is on and become brighter whenever either brake is applied, correct? Thanks, Seth   Gianni312 Posted on Monday, June 08, 2015 - 09:51 am:        Correct.   Ceefuhs Posted on Monday, June 08, 2015 - 10:18 am:        Thanks. Is 1157 the correct bulb? Where could I find that info?] Seth   Akbuell Posted on Monday, June 08, 2015 - 10:20 am:        The bulb should have 2 filaments. One for 'running' light, comes on with ign on. The other is for the brake system. You may not have the correct bulb, or the running light filament is bad. Where I would start. Ah, typed over each other. Does the bulb have 2 'connectors' on the bottom? If so, that should be the right one. Standard 12V auto brake light bulb. Hope this helps, Dave (Message edited by Akbuell on June 08, 2015)   Ceefuhs Posted on Monday, June 08, 2015 - 10:32 am:        Thanks much guys! Seth

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: