Author |
Message |
S1owner
| Posted on Saturday, June 06, 2015 - 07:51 pm: |
|
Ok so 96 S1 harness putting on a vrod light. Harness has from manual Blk wire--- lamp grnd Yellow wire------ low beam White wire-------high beam Orange/white stripe------position lamp Vrod has low beam positive and negative High beam positive and negative So which wires go where from the harness the irange and white is what boogles my mind? |
Buelldualsport
| Posted on Saturday, June 06, 2015 - 08:10 pm: |
|
Black to both negatives Yellow to Low Beam Positive White to High Beam Positive Orange/White Not used, or a power supply for a GPS, radar detector etc. Will be switched by the key. Good Luck |
Mighty_mouse
| Posted on Saturday, June 06, 2015 - 08:12 pm: |
|
The O/W if the same as the X1 is for the parking lamp that's separate in the headlight housing when the key switch is in the park position. MM |
S1owner
| Posted on Saturday, June 06, 2015 - 08:34 pm: |
|
Thank you very much I thought as much but wanted to confirm with others. |
|