| Author |
Message |
    
Tod662
| | Posted on Tuesday, May 12, 2015 - 04:41 pm: | 
|
the bikes new to me i know no history, PO was quite the piece of work. Ive got a 05 manual but not the right one, after I write this I going to try to find one online to look at.
The bike turns over fine and the neutral light is on but no pump whine, no spark, and no check engine light. I tried swapping a ecm but I guess I dont even know if the other one is good. PO gave me a kickstand switch that I put on also. What all sensors are there that would cause this, how do i check if there is power to ECM, where do I start looking?
Not sure if it could be a ground issue maybe? |
Gabby_duck
| | Posted on Wednesday, May 13, 2015 - 09:45 pm: |
|
What specifically is the year and bike you have.check all fuses. Using a test light or meter are you getting power to the fuse.Find the fuel pump connector and unplug are you getting power to the connector. Back pin or pin the fuel pump side of the connector and apply 12v to the fuel pump does it come on. |
Gabby_duck
| | Posted on Thursday, May 14, 2015 - 02:44 pm: |
|
Look up in your manual. Your bike will need a TPS reset. |
|
Troubleshooting (Poor Starting/Running/Handling/Ride Issues) »
Archive through March 21, 2016 »
03 XB9Rno fire no fuel no check engine light