Author |
Message |
Johnod
| Posted on Saturday, April 25, 2015 - 05:13 pm: |
|
On the front caliper, the small bolt in the middle with the spacer, between the two pins. The FM reads torque to 28ft/lbs, that can't be right can it? The mounting bolts which are MUCH bigger don't torque to that much, |
Phelan
| Posted on Saturday, April 25, 2015 - 07:15 pm: |
|
Inch lbs |
Two_seasons
| Posted on Saturday, April 25, 2015 - 08:14 pm: |
|
That that would be 28 in/lbs. If you got anywhere past 10 ft/lbs., replace the caliper thread with a helicoil or timesert! I'll bet you were tired when this happened, right? Ask me how I know |
Johnod
| Posted on Saturday, April 25, 2015 - 09:52 pm: |
|
I suspected in was inch/pounds. The book clearly reads ft/lbs though. Page 2-22 I believe. So it's probably over tight but not ruined. |
|