G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Xbpete Posted on Thursday, March 19, 2015 - 09:39 am:        After extensive google search of Badweb,,, I can't find the dimensions for a locking bar for the primary chain I lent my Jims Tool out a few years back and it was not returned, I would like to make one rather than spend the cash Splitting the cases on a 2000 X-1 Anybody have one they could measure up for me to help Thanks!   Buellish Posted on Thursday, March 19, 2015 - 10:20 am:        My Jim's locking bar measures 4 3/16" L x 1" W x 1/4" thick.The taper is 5/16".   Xbpete Posted on Thursday, March 19, 2015 - 11:27 am:        Thanks Mike! Much appreciated!   Buellistic Posted on Thursday, March 19, 2015 - 01:31 pm:        A door hinge of the right length will also work ...   Xbpete Posted on Thursday, March 19, 2015 - 04:01 pm:        Yeah,, I read about the 4 inch hinge,,, Just finished making the tool,,, Gracias again,,, center rod bearing is gone,,, oh what fun!   Ft_bstrd Posted on Thursday, March 19, 2015 - 08:18 pm:        I have one made from a copper pipe pinched together at each end.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: