G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Lakes Posted on Monday, January 05, 2015 - 12:52 pm:        Hi all i want a 26T front sprocket, where can i buy one? i have 61T rear wheel 27T . thanks for any help   Buellistic Posted on Monday, January 05, 2015 - 01:00 pm:        www.AmericanSportBike.com   Jayvee Posted on Monday, January 05, 2015 - 01:17 pm:        The Baker Long Life 26 T steel pulley can be ordered by any Drag Specialties purveyor as well.   Lakes Posted on Monday, January 05, 2015 - 01:43 pm:        Thank You Buelistic & Jayvee, Anyone know how long , you could expect the alloy front to last?   Koz5150 Posted on Monday, January 05, 2015 - 03:59 pm:        I got less than 10,000 miles out of mone. I ended up switching to a 65 tooth rear which made more of a difference.   Lakes Posted on Monday, January 05, 2015 - 04:53 pm:        thanks i'll get the cast iron one, but just wondering if you managed to fit the 65 rear using the same belt? or did you have to get a longer belt, what sort of riding do you do? thanks for info   S2forever Posted on Tuesday, January 06, 2015 - 06:00 am:        Koz5150, what happened at 10,000? Spline stripped or outer teeth worn?   S2forever Posted on Tuesday, January 06, 2015 - 12:05 pm:        I am running BDL aluminium for 4 k miles, concerned when it will leave me stranded.   Lakes Posted on Tuesday, January 06, 2015 - 03:43 pm:        A friend of mine has the BDL aluminium 26T on a 96 S1 he has not done a lot of miles but he drag races the bike, so put's a lot of shock on driveline, so i the splines will hold up probably tooth wear i would keep an eye on it. i'm interested to know if the 65 tooth rear sprocket will run with stock belt or is longer belt needed? i think would like to try the 65T rear i think with 26T 61T = 3.7 final ratio 27T 65T = 3.8 .   Koz5150 Posted on Wednesday, January 07, 2015 - 12:23 am:        Stripped splines   Jayvee Posted on Wednesday, January 07, 2015 - 11:47 am:        I've seen two versions of aluminum front pulley, one that's solid aluminum, and there's another one out there with a steel insert for the splines. I don't know who made which, but the insert is visible in pictures of them. I had the one with steel splines for a short time (pre-Baker6.)   Lakes Posted on Wednesday, January 07, 2015 - 01:43 pm:        my friend who drag races S1 said he has BDL i think i would need a longer belt if i put a 65T rear with 27T front? the belt i have is 128T   Koz5150 Posted on Wednesday, January 07, 2015 - 06:10 pm:        Well, I can tell you I am running a stock belt with a 27 tooth front and a 65 tooth rear with no problems. I got 1000 miles on the setup so far.   Lakes Posted on Thursday, January 08, 2015 - 03:34 pm:        thanks Koz is the belt tight? my belt 128T   Lakes Posted on Thursday, January 08, 2015 - 03:40 pm:        Thank's Koz , my belt 128T   Koz5150 Posted on Friday, January 09, 2015 - 12:36 am:        I run very loose.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: