| Author | Message | ||
     Buell_bender |
After visiting this forum I don't see a lot on Cyclones, were these lower production or just not as popular as the other models? | ||
| Court |
There were may produced and there are MANY topics of discussion related to them. Try searching M2 and you may get more hits . . the Cyclone nomenclature is less common than the M2. Probably one of the best motorcycles ever built. | ||
| Hootowl |
Look under old school buell. The M2 has its own subforum. http://www.badweatherbikers.com/buell/messages/476 23/325017.html?1412360076 | ||
| Kenm123t |
It was the BEST TUBER built Even more so in S3 livery and the Cyclone seat. At 97k miles I would buy a new one just like it. | ||
| Tripper |
Check the AUCTIONS FOR GLITCH! | ||
| Ezblast |
Woohoo! I did it guys - she's rebuilt from the accident and running! https://www.youtube.com/watch?v=tho7Rbp2F8g&feature=youtu.be  EZ | ||
| Pwnzor |
Damn, EZ.... That's straight out of Mad Max! I like it. | ||
| Ezblast |
Thanks - been riding and getting used to everything again.  EZ | ||
| 46champ |
Ezblast how much do you think it would cost to duplicate your bike? | ||
| Ezblast |
About 5 grand to 8 grand - a lot of one off stuff, custom stuff - makes it hard to figure. you'll need a friend who welds as well - lol EZ | ||
| Sharkguy |
Anyone else having trouble viewing the classifieds, especially the bikes for sale ads? I can view the parts and accessories but there is no bikes section.  | ||
| 1313 |
Ummm, YEP... | ||
| Buster1903 |
Hi Buellers, I live in North-Central, New Jersey. I have done most of the work on my 05 Lighting myself with some help form Brumbear and Jay (thanks guys). But now I think I need someone who knows a lot more about Buells and motorcycles then me to do some work on it. (Engine noise and exhaust issues) I'm trying to avoid dealer expense. I here Liberty Harley-Davidson, Edison, NJ is good but they are booked till July and it will quickly cost me more then my bike is worth. Does anyone have a suggestion where or who is Buell knowledgeable and can help? } | ||
| Sophiababy |
Been thinking about doing a diy projector, so I bought some leds. I don't have the monitor or lens or anything yet, just the leds and meanwell psu's. (thinking about waiting for the 3d without glasses type and trying that if it's possible) The leds get real hot, like a tec unit would. I tried using the amd stock quad pipe heatsink as a test with fan, and it overheats under a min, I mean it burning hot. I see others are using the corsair h60 for this but that's alot more expensive that I planned on. I thought about diy water cooling but that's either more expensive, or I need access to a mill (I do, but not sure what it would cost me to get blocks made). All the down facing 120mm or any 120mm heatsink seems priced up there along with the h60 anyways. I'm wondering what the heck I should do about this heat prob. Think of it like a 9a 15.4v tec, enough cooling and it won't get hot at all, but not enough and it's overheats real fast. Prob is I wasn't expecting it to be like this with high powered leds. Edit: http://en.ofweek.com/manufacturer/led-heat-sink Forgot to mention the type of stuff they are passing off to use with these leds. The above link is the best one I've seen so far. It's way over priced I know. That heatsink above couldn't be any better then the stock quad pipe amd sink could it? | ||
| Motoenthusiasts |
There is a new shop in Southern California called Moto Enthusiasts. They are located in Vista but will service the whole so-cal area, and also the Las Vegas/Henderson area in Nevada. They specialize in Buells, but will work on all bikes, even dirt. Free pick up and drop off to paying customers as well. Check them out! www.motoenthusiasts.com www.facebook.com/motoenthusiasts | ||
| 46yeah |
I recently tried to put some LED lights on my Blast P3 and am running into some issues. I have installed resistors that I bought from O'Riley Auto parts and it seems like this has not done the trick. My lights remain constantly on and will not flash...anyone else have had this issue??} | ||
| Stirz007 |
Geoff May's Race Suit up for grabs - http://www.ebay.com/itm/301819861644?ul_noapp=true | ||
| Ourdee |
Sold for US $1,045.00   Was a custom suit. Close to size 52. | ||
| Oddball |
Good looking suit. Has a bit of an astronaut look to me. Just needs a NASA helmet. | ||
| Kenny_gilgore |
A Fool And His Money Will Soon Part | ||
| 46champ |
How much do those suits go for new? | ||
| Hybridmomentspass |
http://www.revzilla.com/dainese-race-suits#v2-page =1&page_size=96&sort=price_low&tab=all&implicit_fa cets[]=473 just one place they start around 900 bucks but, as mentioned, this was not an off-the-wall item, based on my drag experience and ordering suits from Vanson, Id say the patches and such were probably 3-400 on their own. | ||
| Blake |
 (Message edited by blake on May 10, 2016) | ||
| Blake |
| ||
| Blake |
 (Message edited by blake on May 11, 2016) | ||
| Aeholton |
Donation sent. | ||
| Blake |
Thank you sir! I was using the old GDB to get the banner image files uploaded, and ran into some hiccups. From the looks of it you'd think I was pretty desperate. Well, that isn't far off. LOL. | ||
| Diablobrian |
Gotten into a tight pinch money wise and have to sell my Buell. Info on my bike is in my profile along with contact info. I need cash fast so I know this is going to hurt. I just hope someone will love it as much as I do. I posted on the classifieds too. My bike isn't your run of the mill xb. I have no idea how to price it. | ||
| Rufustuna |
To customize Does anyone supply seats and rear guards like the ones shown in this picture ?  | ||
| Midknyte |
 |
