| Author | Message | ||
     K12pilot |
Need to get rid of some things I don't need or won't use. Post here for interest/dibs, but email me direct with user name so I can try to keep things straight. Pm's don't always work for me ( K12pilot@me.com I can send more pix via email. I don't have time to run back & forth to the PO everyday so we will estimate shipping, if to high I will refund the diff Reasonable offers please BUT.. I would really be more willing to trade for perfect X1 carbon body parts, hopefully blue weave...yea I know ( S1 bread box, no scrapes, in good shape, I think it is all there...you probably know better   S1 Stock seat no rips or tears  PM wheels, I would change the bearings, tubes are in the hubs, excellent shape if polished up, no gouges, tires are shot.  D&D header & muffler, came off of an M2, you know what else it will fit better than me. Surface rust on muffler, nothing a wire brush & can of hi temp paint will not cure. Header has a ding the size of my index finger print, not too bad you could probably freeze it out, all other scrapes should polish out just fine. O2 bung is sealed up, you may be able to open it up IDK.     S2 Parkway Blue deep lids, 8.5/9 condition no cracks, some light rubs and some small chipping nothing major  S3 deep lids 8.5/9condition no cracks, IDK what you call the color, almost looks like my Black Sapphire S2 but not quite. some light scratches & couple of chips on L bag, R bag pretty good should polish right out  Soft Buell side luggage, no rips or tears, more dusty than anything..  Also looking to sell or trade the body work off the X1 I am going to build, body work only nothing else.  More to follow as I dig out. Thanks Ride safe, Chris (Message edited by k12pilot on September 06, 2014) | ||
| Lynrd |
I could use those PM wheels for Shelia... | ||
| Kenm123t |
I ll take the S3 deep lids black ones (Message edited by kenm123t on September 06, 2014) | ||
| Blu1hockey |
Does the tail go with the body work? | ||
| K12pilot |
Yes, tail will go with the body work. It has been posted that this is somewhat of a special & RARE set of body work...it is just NOT me.. Full disclosure.. If you look on the tank cover where your knees would be, you can see a black spot where the graphics have peeled off other side is the same, also on the tail just past the seat strap there is a small chip in the graphics, both could be "hidden" with the right touch, I will have to look at the chin again & report back on the condition, tomorrow is riding day, I will try to get to storage & check it out, Please let me reiterate.... I would much rather TRADE for what I need first before SELLING, $$ is not my driving force here, it is what I need for my build. Looking for mint X1 OEM carbon parts (would love the blue weave to match the frame (I know it's a long shot) & or the short tail conversion, for my build this winter, I also have way too many S2 parts laying around, but I can't commit to ant of them yet, I have to finish another S2 build for my friend first. Thanks, Chris | ||
| Cgerb73 |
I have nothing to trade but if you are selling the shock I am interested. Needs to be 16" eye to eye and is not a leaker. Also interested in s3 deep lids if previous poster doesnt buy. Gerb (Message edited by cgerb73 on September 06, 2014) | ||
| Phelan |
Sending PM about the wide S2 lids. Also, you should hit up Dan@NRHS (303-702-1600) about the limited edition bodywork. He has an X1 with the same bodywork and may be interested in it for spares, though I don't know for sure. | ||
| Kev_m |
Any idea if an S1 seat would fit an S3T? (Message edited by Kev m on September 28, 2014) | ||
| Forcefed44 |
D&D Exhaust system.. E-mail me at: BlackArtBikes@gmail.com Chris | ||
| K12pilot |
I doubt the seat will fit. But it is free to good home u pay the ride )) | ||
| S1w222 |
Is the s1 seat the single seat? | ||
| Joel |
I could use the S1 seat if no one needs it more that I. |
