| Author |
Message |
    
Zmannm2
| | Posted on Sunday, March 23, 2014 - 09:07 pm: | 
|
I have a D & D exhaust on my 2001 M2. It sounds like a Buell should like! |
Coxster
| | Posted on Wednesday, March 26, 2014 - 06:52 pm: |
|
I have the V&H and love it, but it's a hair loud. I keep it quiet around my neighbors. BTW you have to check the allen screws in the endcap often |
Imadog
| | Posted on Thursday, March 27, 2014 - 05:47 am: |
|
I have the V&H and really enjoy the sound. All the carburetor mods listed here are spot on with that pipe and a Force Winder intake. Coxster, thanks for the tip on the Allen bolts, I will check them this evening. |
Coxster
| | Posted on Thursday, March 27, 2014 - 10:09 pm: |
|
loctite 222 |
Koz5150
| | Posted on Saturday, May 03, 2014 - 08:57 pm: |
|
Finally finished and installed on my bike this weekend. Here is a link to a video clip of the pipe at idle.
http://youtu.be/CJ7MzUgrJSU
(Message edited by Koz5150 on May 03, 2014) |
Schwiiing
| | Posted on Thursday, May 08, 2014 - 07:30 pm: |
|
Koz -
That pipe sounds and looks awesome. Would love to see some more detailed pics on how you've mounted (supported) it.
Thanks. |
Phelan
| | Posted on Thursday, May 08, 2014 - 07:55 pm: |
|
It may be loud, but is it dual-reverse cone megaphone loud? 
 |
Koz5150
| | Posted on Thursday, May 08, 2014 - 08:55 pm: |
|
|
Koz5150
| | Posted on Thursday, May 08, 2014 - 08:59 pm: |
|
Two simple mounting tabs one in the front, and one in the back. The back also got a 1/4" thick rubber washer sandwiched between a couple of stainless ones. It was clean and simple.
(Message edited by koz5150 on May 09, 2014) |
D_adams
| | Posted on Wednesday, August 13, 2014 - 07:04 am: |
|
1st stab at this one, still need to do mounting tabs though.
 |
Gusm2
| | Posted on Wednesday, August 13, 2014 - 04:31 pm: |
|
The reverse cone's look like Stevie Wonder welded them together |
Hootowl
| | Posted on Wednesday, August 13, 2014 - 05:16 pm: |
|
"The reverse cone's look like Stevie Wonder welded them together"
Or me.  |
Phelan
| | Posted on Wednesday, August 13, 2014 - 05:33 pm: |
|
Don't shoot me, it was with a 6 year old 120 AMP 20% duty cycle MIG! Terrible they were, but the grinder cleaned them up :P. |
Phelan
| | Posted on Wednesday, August 13, 2014 - 05:38 pm: |
|
Better.
 |
Captainkirk
| | Posted on Monday, August 25, 2014 - 03:41 pm: |
|
Buell race pipe. Yep, it's loud...loud enough I need to wear earplugs for anything more than a short hop. |
Ratbuell
| | Posted on Monday, August 25, 2014 - 09:49 pm: |
|
Pack the race pipe with steel wool. Doesn't blow out anywhere NEAR as fast as the factory fiberglass packing (you do know you need to repack it, right?), and the steel wool is MUCH more mellow than the 'glass. Still a rip-snortin' power setup, just...more polite.
ish.
 |
Captainkirk
| | Posted on Tuesday, August 26, 2014 - 08:50 am: |
|
Yeah, probably time again. Last time I used the American Sport Bike kit and it worked pretty good (if you ignored the instructions and used common sense). I did a write-up on it here a few years back, but I have no idea where it got archived to. |
