| Author | Message | ||
     Bikerrides |
Can someone post pictures of the electrical connectors behind the dash panel of an S2? I also need to see how the handlebar controls connect into the main harness; well, everything at the front of the bike. Need to know how many 12, 8, 4 pin, etc. plugs there are and part#s, if anyone knows. PO cut all the connectors off behind the fairing and did a •••••• job with crimp connectors putting it back together. I want to correct the wiring and have a local source for the connectors, but need to know what is needed. Thanx for the help! | ||
| Bikerrides |
Does anyone know a good aftermarket supplier for the connectors? I need 2-12 pin and one 4 pin connector male and female. I found a local custom bike shop that had all the HD housings, pins, etc. but I think it can be done for much less than $140. I can cut that in half by replacing the current harness with one I bought from a BWBer that already has at least one side of the plugs. If there is an OEM supplier online or someone who makes OEM compatible connectors, I might still be able to rewire the bike for even less money. | ||
| Davefl |
I sent you a pm. I scan some images from the parts catalog.. I found a link that might be able to help you out. http://www.powersportsuperstore.com/Bikers-Choice- Wiring-Harness-Insulation-Plug-Assor-p/4069839.htm | ||
| Bikerrides |
Found all the OEM compatible connectors, pins, etc. here http://www.namzcustomcycleproducts.com/products/OE M_matenlock.html for less than $50 including shipping as opposed to $140 at a local custom bike shop. Thank goodness for the internet! |
