G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Krimpx Posted on Saturday, May 24, 2014 - 02:14 pm:        Is it unsafe to use ecmspy with all of the race ecms, or just those from EBR? My race ecm is labeled as part Y0161.08AH. That number isn't listed on EBR website. I don't know if that means it is can be flashed with ecmspy, or must use tunerpro. Will ecmspy damage it? Is there a way to flash it with a map for factory exhaust without sending it in to EBR?   Uly_man Posted on Sunday, May 25, 2014 - 12:38 pm:        You could have a look at this. http://www.badweatherbikers.com/buell/messages/406 2/627547.html?1303337964 Give EBR a ring and ask them.   Froggy Posted on Sunday, May 25, 2014 - 02:20 pm:        Free ECMspy is not compatible with the EBR ECMs, the old Buell P&A ECMs are fine with it. Your ECM is from EBR.   Krimpx Posted on Sunday, May 25, 2014 - 09:55 pm:        Thanks Froggy. I guess I need to dig deeper for tunerpro information, and guides. Ecmspy seems to be easier to find information for. I don't want to be without a bike for the time it would take to send in for a reflash.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: