| Author |
Message |
    
S1owner
| | Posted on Wednesday, May 07, 2014 - 07:46 pm: | 
|
GOT IT!!! The secret these two tools Blumz loaned me belt stretch allowed to much flex and the socket is very well designed!
But my breaker did suffer!
 |
Pikeben08
| | Posted on Wednesday, May 07, 2014 - 08:52 pm: |
|
Oh snap! Literally!
You win!
 |
Leftcoastal
| | Posted on Wednesday, May 07, 2014 - 09:23 pm: |
|
DAMN! Never seen the like of that before!
Hoping that's some name brand bar so you can get it replaced free. If not, hang that one up in a frame for posterity. |
S1owner
| | Posted on Wednesday, May 07, 2014 - 09:25 pm: |
|
My trusty 14 yr old craftsman lifetime replacement. |
V74
| | Posted on Thursday, May 08, 2014 - 03:24 pm: |
|
where do I get a socket like that?
can I lock the pulley by putting a lock bar in the primary or will this damage gears or something else? |
S1owner
| | Posted on Thursday, May 08, 2014 - 03:28 pm: |
|
Google it I know I have seen sim on ebay but they were aluminum make sure you get steel |
Bluzm2
| | Posted on Thursday, May 08, 2014 - 10:22 pm: |
|
To be honest I don't remember where I got the socket. The holder however is kind of special. It came from the Buell factory when they had the "sale" after HD killed them off. I like to imagine all the cool bikes that sprocket holder was used on.
Brad |
Kalali
| | Posted on Friday, May 09, 2014 - 08:10 am: |
|
That looks like the socket I use on the oil filter housing on my BMW. Mine is 36mm and fits the X1 rear axle nut perfectly. The one shown is probably 1 7/8". Look under impact sockets.
(Message edited by kalali on May 09, 2014) |
Brother_in_buells
| | Posted on Friday, May 09, 2014 - 01:21 pm: |
|
Lifetime warranty yeah-right ,when it breaks lifetime is over and also is the warranty
btw ,here is a low socket for the pulley nuts,
http://shop.buell-parts.com/48mm-Nuss-fuer-vordere s-Antriebsritzel-Buell-RR-und-XB-Modelle-_1 |
Pikeben08
| | Posted on Friday, May 09, 2014 - 01:56 pm: |
|
I bought a 1 7/8" 12pt which from Sears that did the trick for me. I think it was like $25-$30.
Just make sure you look at the size on the socket not the rack it is sitting in. DAMHIK. |
