G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Austexs3 Posted on Wednesday, April 02, 2014 - 12:06 pm:        Anyone removed the gearcase cover on a 2000 S3. Do you have to remove the pushrods first? I'm trying to replace my oil lines and can't get access with the gearcase cover on the motor? Any special tools needed?   Essmjay Posted on Wednesday, April 02, 2014 - 12:41 pm:        Yes to the first and no to the third. Not sure about the second as it isn't really a question?   Austexs3 Posted on Wednesday, April 02, 2014 - 12:55 pm:        Thanks Essmjay, This site is so great! With the help of this website, I have replaced my crankseal, rockerbox gaskets and several other small improvements. I'm an industrial tax consultant by trade but there's nothing like getting your hands dirty working on a Buell. Thanks again.   Purpony Posted on Wednesday, April 02, 2014 - 01:07 pm:        it would be easier to just unbolt the oil pump and drop that down to get access to the oil lines.   Austexs3 Posted on Wednesday, April 02, 2014 - 02:51 pm:        Damn, never thought about that. Thanks for the good idea. Website works again!

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: