| Author | Message | ||
     Paulpud |
I have a ton of left over parts just sitting on shelves id like to get rid of and do some spring cleaning so i can work on my bikes, this is a complete list of everything i have, no reasonable offers refused, all prices are each and plus shipping. 4 rear standard height shocks - $30 1 rear standard height shock with broken lower mount - $10 3 fans - $35 5 starters - $30 3 Pair of rocker boxes with covers - $40 4 coils - $10 ex valve module -$5 complete exhaust strap set - $30 2 cam sets with black timing covers - $75 3 lower oil line sets (screw in style) $15 set of oil lines to oil cooler - $10 oil pump $20 2 reg (1 has upgraded plug) - $30 2 dented xb9 headers - $30 4 front brake systems (master, line, caliper) - $40 2 front 04 sprockets - $10 4 rear exhaust moons -$5 2 tensioners - $10 6 different swing arms (no SS arms) - $30 4 front axles - $10 6 swingarm bolts -$5 rear caliper - $20 2 fuel pumps - $30 1 2009 fuel pump only 3600 miles - $80 4 sets front peg mounts - $15 right side lightning drop peg - $10 4 air box assemblies - $15 set of xb12 cams w 6k miles - $50 xb9r cluster broken pretty bad, good for parts - $5 xb12r cluster 12k, broken mount and scratched screen - $20 2009 xb9sx gauges 3600 miles - $80 4 sets of hand controls, some are scratched, broken starter button etc - $30 firebolt clutch cable - $10 lightning clutch cable - $10 2 black chin fairings, both have scratches - $60 1 red chin fairing clean - $80 1 carbon fiber belly pan - $100 1 black air box cover, scratches - $50 07 xb9r harness, broken clips, etc - $20 05 xb9s harness, broken clips, etc - $20 03 xb9s harness, ok - $30 04 xb12r harness, broken clips, etc - $20 xb9r cylinder jugs - $50 xb9r pistons $40 stator - $40 xb9s throttle body with injectors, tps - $30 7 sets of stock pushrods - $10 xb9s engine lower half with trans, etc 12k miles (bike wsa crashed i did not test drive prior to pulling)- $150 3 complete shifter assemblies, rubber tip is ripped on all of them - $60 Again all prices are each piece and shipping is extra. the more you buy the better deal ill make. Paul 516-784-7124 pud187@aol.com | ||
| Paulpud |
Also forgot about: cherry bomb wheels, 2" curb rash on one side of each rim, good pirellis - $350 silver rims, clean, with good pilots - $325 gold rims, front has a pretty good dent, rear is clean, tires are worn - $150 micron full exhaust, clean - $750 | ||
| No_rice |
possibly interested in lightning clutch cable. one of the front pulleys. are they 30 tooth? and maybe one of the shift pedal assemblies. lightning peg. need to give the bike and my parts stash a better look over this weekend. (Message edited by no_rice on March 27, 2014) | ||
| Icebear |
Is the exhaust valve module an emulator or the original piece? | ||
| Paulpud |
Stock valve module | ||
| Cupcake_mike |
Interested in a shifter assembly...is this xb stuff? Pics please | ||
| Phelan |
Must... Resist... Urge to spend savings... | ||
| Paulpud |
all xb stuff no tuber parts | ||
| Phelan |
have any stock XB footpegs? | ||
| Paulpud |
only footpeg i have right now is a stock right side lightning peg. I will have more thurs/fri of next week. | ||
| Shagg1970 |
Are all xb fans the same? I have an xb12x and the fan is getting raspy like the bearings are going. | ||
| Paulpud |
all the fans are the same, some had grills over them, some didnt, plugs are the same 03-10 | ||
| No_rice |
are the front pulleys 30 tooth? for 04 there were 2 different part numbers for the front pulley. | ||
| Paulpud |
04 was the large tooth belts, pulleys have 27 teeth 03 are small teeth and have 30 teeth. | ||
| Kruizen |
Part number of the fuel pump? | ||
| Cupcake_mike |
so pics of the shifter stuff? | ||
| Jrobey7 |
asking for pictures of BUELL parts! Go out and look at your own bike... It's the SAME thing... Hahah come on everybody we all know what stock Buell parts look like. * if it's a plastic part or a part that would matter, I can understand wanting pictures. But the stock parts that all look the same... Do we Really need pictures? | ||
| Shawns |
You have any lens glass for a firebolt? | ||
| No_rice |
asking for pictures of BUELL parts! Go out and look at your own bike... It's the SAME thing... Hahah come on everybody we all know what stock Buell parts look like. * if it's a plastic part or a part that would matter, I can understand wanting pictures. But the stock parts that all look the same... Do we Really need pictures? i dont see in this pointless statement where you're asking to get any parts? someone is more then welcome to ask to see the kind of condition that something THEY are spending THEIR money on, is in. there is no problem with wanting to know if the damage on something is acceptable to the person who is putting it on their bike. 04 was the large tooth belts, pulleys have 27 teeth 03 are small teeth and have 30 teeth. ok... in my parts books here at work, the 04 has one sprocket for the 12's(#42885-95, no tooth count listed) and another sprocket for the 9's that is a(#40343-03, 30tooth but the 05,06 xb everything list a (#40288-95, 30tooth) and 07-08 list (#40288-95, 27tooth) so ya, confusing... and ive never looked at a 12 front drive sprocket closely, all my others are 9's. the bike was converted to a hokey chain setup at some point so i have nothing to compare to see what i need. im in for the clutch cable and footpeg so far(assuming shipping isnt ridiculous) | ||
| Devo1959 |
Hi I have a 2006 uly and would like the ex valve actuator module, a starter and fuel pump that would be correct (work) for a 2006 uly. Thanks, jeff | ||
| Paulpud |
ALL THESE PARTS HAVE BEEN SOLD!!!! Just picked up a 2005 XB9SX and a 2004 XB12R both are crashed and being parted out. Email with needs. Blow out prices are no longer valid....... | ||
| Skntpig |
Wheels? | ||
| Paulpud |
Black with Pirelli corsas or gold with decent shinko? On front and worn pilot on rear. | ||
| Tcazes |
Pics of the gold? My xb12r's are looking rough |
