| Author | Message | ||
     Pmjolly |
I use a Pit Bull trailer restraint for my 1125. I was curious when they would offer one for 1190RX. Here is the response to my email inquiry to Pit Bull. We've been providing EBR the pins for the 1190RX and always sent the same pins that we used on the 1190RS. They seem to work just fine. The "EK" pin kit: F0075EK-001. It's designed for use with the wide frame like you would have on your 1125 TRS system. Please let me know if you have any other questions at any time! George F. Hoffman General Manager Pit Bull Products, Inc. 256-533-1977 Don’t run with the pack…lead it! | ||
| Jdugger |
I have a set that seemed to require me to enlarge the safety pin hole a touch, but is fine otherwise. | ||
| Larryjohn |
Interesting. According to Pitbull's fitting chart, only the XBRR and 1190RR use the wide TRS frame. The chart does not show the wide frame kit for the 1125R. http://www.pit-bull.com/trailer_restraint_chart.pd f | ||
| Mackja |
Uses wide frame same as 1125r, and they have the pins available, I ordered a set a few weeks ago. Don't think the 1190rx shows on their web site, just give them a call, they will get them out to you asap. | ||
| Larryjohn |
The TRS frame for a stock 1125R is different than that for the 1190 (or an 1125R with the chain drive swingarm). I just ordered both and here are photos of each. 1190  1125R  | ||
| Mackja |
Beg to differ, you better try that narrow frame, it will not work on 1125 or 1190, must use the wide frame. I found this out after ordering a kit for my 1125r from STG, when it came in, it was to narrow, called Pit Bull they sent me the wide frame. Unless they have recently produced a straight leg frame for the 1125 or 1190 it won't fit. Those look like new units have you tried to use them yet? | ||
| Larryjohn |
Well that sucks. At least I won't need it too soon and have time to get it replaced. I'll have a chance to fit it up this weekend and will take photos. |
