| Author |
Message |
    
Pawdaddy
| | Posted on Sunday, March 02, 2014 - 04:13 pm: | 
|
Turn key to the on position, push kill switch to the on position, oil light-high beam light-and neutral light come on. Push the start button, nothing. When pushing the kill switch to on you do hear the relay click once.
bike has been running great. Checked all fuses good. grounds under seat look good. help. |
Reepicheep
| | Posted on Sunday, March 02, 2014 - 05:22 pm: |
|
I'd start with a charge and load test of the battery. |
Pawdaddy
| | Posted on Sunday, March 02, 2014 - 07:20 pm: |
|
Battery only about 6 months old, stays on a trickle charger. How do you do a load test? |
Pawdaddy
| | Posted on Monday, March 03, 2014 - 07:09 pm: |
|
changed relays. nothing. Unplugged EBR ECM to hook up stock ECM. Plugged in stock ECM, problem solved. Unplugged stock ECM and plugged back into EBR ECM and all is still good. Guess the old girl just needed alittle attention. |
Reepicheep
| | Posted on Monday, March 03, 2014 - 07:44 pm: |
|
Next time it does it (if it does it again), sweep the bars to a few different positions and try hitting the starter button again. |
Pawdaddy
| | Posted on Tuesday, March 04, 2014 - 04:40 am: |
|
Thanks. will store that somewhere in my memory. Whats the purpose of doing this? |
Reepicheep
| | Posted on Tuesday, March 04, 2014 - 08:01 am: |
|
To find out one of the wires in the wire bundle around your steering head where it goes under the frame is internally cracked.
Takes a little time to disect the bundle and find and repair the broken wire, but not a big deal. |
|
Troubleshooting (Poor Starting/Running/Handling/Ride Issues) »
Archive through June 11, 2014 »
2009 ulysses wont start....