G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Dennis_c Posted on Tuesday, February 25, 2014 - 12:43 am:        I have a brain freeze I am looking for HOSE THERMOSTAT BLEED. I starts at the thermostat and goes to ? it clamps somewhere because theres a clamp mark on the the end of hose. On page 5-19 of the 2008 service manual #16 is the hose also 2010 service manual on page 5-20 #13. I have been looking everywhere I must be blind a bat help   Mhpalin Posted on Tuesday, February 25, 2014 - 01:06 am:        Page 5-19 step7 using new clamps[5]install thermostat bleed hose[13]from thermostat housing ass. to angled fitting on top inner side of right rad. Mike   Dennis_c Posted on Tuesday, February 25, 2014 - 09:18 am:        I know where the top goes on the thermostat where does the bottom of the hose go?   Mhpalin Posted on Tuesday, February 25, 2014 - 09:38 am:        It goes from the thermostat to the RAD   Dennis_c Posted on Tuesday, February 25, 2014 - 07:11 pm:        I found it I covered it up to soon thanks

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: