| Author |
Message |
    
S1owner
| | Posted on Tuesday, December 31, 2013 - 07:39 pm: | 
|
Any of you want to get rid of one of the stock braces I may want one looking for cheap |
Jolly
| | Posted on Sunday, January 05, 2014 - 12:16 pm: |
|
I'm going to let this run until Jan 15,
I will shoot each person on the list a PM for how to pay, once all funds are collected I will turn it over to the machinist.
Paypal works for me if you send money as a gift to friend or relative so that I don't lose any funds in the paypal process.
thanks for being patient while I wait on the Christmas season to roll by and personal discretionary funds to recover.. |
Jolly
| | Posted on Tuesday, January 14, 2014 - 09:43 pm: |
|
Id like to get this closed out since its been hanging here for a bit due to the holiday season.
Ill send each of you a PM on how to get a hold of me but if I miss you please send me a PM so that I can get the money and get the order started and finished up.
thanks for being patient while I let this ride for a bit. |
Buelljunkie
| | Posted on Friday, January 17, 2014 - 06:52 pm: |
|
Alright Jolly...ya got me again!
Count me in for 2...
3 - Jolly (yes I'm buying more)
1 - Devo 1959
1 - Bikerrides (?)
1 - BlackM2 (unpolished)
1 - Flatheadbill (1 unpolished)
1 - Mike13
2 - buelljunkie |
Jolly
| | Posted on Saturday, January 18, 2014 - 07:33 pm: |
|
you can pay via personal check or paypal, if its personal check, it will take a few days to clear, if its paypal, pay as gift or include the fee in your payment please.
lets try and wrap the payments up before Wednesday so that I can get the machinist going and get these done ASAP, maybe he can ship them out to me with my S2 side plates if we get them paid for quickly enough.
you can reach me through PM and I will need address for shipping and I would like to have phone number as well, in case there are any issues I can get a hold of folks.
3 - Jolly - paid
1 - Devo 1959 - paid
1 - BlackM2 (unpolished)
1 - Flatheadbill (1 unpolished)
1 - Mike13
2 - buelljunkie |
Jolly
| | Posted on Monday, January 20, 2014 - 09:22 am: |
|
3 - Jolly - PAID
1 - Devo 1959 - PAID
1 - BlackM2 (unpolished)-
1 - Flatheadbill (1 unpolished)- PAID
1 - Mike13 -
2 - buelljunkie - |
Jolly
| | Posted on Tuesday, January 21, 2014 - 07:58 am: |
|
Posted on Monday, January 20, 2014 - 09:22 am:
3 - Jolly - PAID
1 - Devo 1959 - PAID
1 - BlackM2 (unpolished)-
1 - Flatheadbill (1 unpolished)- PAID
1 - Mike13 - PAID
2 - buelljunkie - |
Jolly
| | Posted on Tuesday, January 21, 2014 - 12:16 pm: |
|
3 - Jolly - PAID
1 - Devo 1959 - PAID
1 - BlackM2 (unpolished)- PAID
1 - Flatheadbill (1 unpolished)- PAID
1 - Mike13 - PAID
2 - buelljunkie - |
Jolly
| | Posted on Tuesday, January 21, 2014 - 04:38 pm: |
|
3 - Jolly - PAID
1 - Devo 1959 - PAID
1 - BlackM2 (unpolished)- PAID
1 - Flatheadbill (1 unpolished)- PAID
1 - Mike13 - PAID
2 - buelljunkie - PAID
I've got one more Buell buddy who has not chimed in on the forum but has let me know he wants one, I should be able to turn the order in later today or tomorrow. |
Jolly
| | Posted on Wednesday, January 22, 2014 - 11:52 am: |
|
3 - Jolly - PAID
1 - Devo 1959 - PAID
1 - BlackM2 (unpolished)- PAID
1 - Flatheadbill (1 unpolished)- PAID
1 - Mike13 - PAID
2 - buelljunkie - PAID
1 - Gostaz - PAID
That's it, I'll pay machinist today. |
Jolly
| | Posted on Wednesday, January 22, 2014 - 06:21 pm: |
|
machinist paid, order has been placed. He has already ordered the material so we should have them in about a week since he has to fit them into other projects. I will keep you guys posted on status. |
Jolly
| | Posted on Wednesday, January 29, 2014 - 03:01 pm: |
|
Braces are made, he is working on the spacers now. Each brace comes with 5 spacers to provide an option for increased off set from pulley if needed. So, 50 spacers to go. Should be able to ship them out to me this week or early next week, I'll separate and package up and get them out as fast as I can. |
Blackm2
| | Posted on Wednesday, January 29, 2014 - 04:31 pm: |
|
Awesome, thanks for hooking that up David. Think they will get here by the end of next week? Going on a trip to Socal and want to strip her of more unnecessary clothing |
Jolly
| | Posted on Wednesday, January 29, 2014 - 08:00 pm: |
|
Cant promise that the machinist will be done in time, but I can promise that if I get them I will get yours out immediately to try and help you out. |
Jolly
| | Posted on Tuesday, February 04, 2014 - 06:53 pm: |
|
I have the hardware, and the parts are done, just need to get them polished. for those of you that ordered unpolished he is going to try and split the order and get the unpolished ones out quickly. |
Jolly
| | Posted on Tuesday, February 11, 2014 - 04:37 pm: |
|
Just got a note from the machinist, all parts shipped to me today. I will quick turn to each of you as fast as I can. |
Jolly
| | Posted on Thursday, February 13, 2014 - 03:33 pm: |
|
Parts arrived today, I will try and get them packaged up and in the mail by Saturday.
there are two sets of spacers for different offset in the event you decide to install a pulley cover like American Sport Bike sells - you need a little extra off set to clear the button head screws. if you don't have the cover and only need stock offset use the two shorter spacers and don't use the oval one with the two holes. if you need the extra off set, use the taller ones and the oval with the two holes.
two were left un-polished per order.
|
Jolly
| | Posted on Thursday, February 13, 2014 - 06:28 pm: |
|
I got them all packaged up, they will be in the mail on Friday.
for those of you that did unpolished, post a pic when you get them powder-coated! |
Jolly
| | Posted on Friday, February 14, 2014 - 01:52 pm: |
|
All were mailed today |
Zenbiker
| | Posted on Friday, February 14, 2014 - 05:52 pm: |
|
Those look wicked cool Jolly! Good work! |
Bluzm2
| | Posted on Saturday, February 15, 2014 - 06:47 pm: |
|
Jolly,
I'm regretting not getting one...  |
Jolly
| | Posted on Saturday, February 15, 2014 - 07:08 pm: |
|
I can have more made...... |
Phelan
| | Posted on Sunday, February 16, 2014 - 11:04 am: |
|
Jolly let me know when you get the next round ready to rock. I'm not ready just yet, but will be soon to go ahead and get one of these as well now that I picked up one of the matching frame braces .
Slightly off-topic question: the guy that builds these, can he do polishing on other stuff? I have a set of once polished XB rocker covers that is turning out to be a real pain to clean. |
Jolly
| | Posted on Sunday, February 16, 2014 - 12:23 pm: |
|
Shoot me a note, I might be able to help without going through the machinist. |
Phelan
| | Posted on Sunday, February 16, 2014 - 12:44 pm: |
|
Noted (pun intended, I sent you a note). |
Devo1959
| | Posted on Tuesday, February 18, 2014 - 06:48 pm: |
|
Hi David
Just recieved mine and it looks great. I think I will love it when I mount it up. I have a chain drive an it adds a little more protection and looks.
Thanks for your work on this,
Jeff |
Phelan
| | Posted on Wednesday, February 19, 2014 - 11:29 am: |
|
Got mine yesterday! |
Blackm2
| | Posted on Wednesday, February 19, 2014 - 12:30 pm: |
|
Got mine too, thanks again for coordinating David. |
Phelan
| | Posted on Wednesday, February 19, 2014 - 02:29 pm: |
|
Whoops, I posted in the wrong thread. I got one of the frame braces lol. |
Flatheadbill
| | Posted on Friday, February 21, 2014 - 08:27 pm: |
|
Mine showed up yesterday. Even to Ontario Canada. Great looking parts. Will work great. I appreciate you taking the time to mail them "international". Better deal than ebays global ripoff program. |
Jolly
| | Posted on Saturday, February 22, 2014 - 02:14 pm: |
|
did everyone else receive theirs? chime in, let me know. if you have it mounted post a photo. |
Mike13
| | Posted on Monday, February 24, 2014 - 07:25 pm: |
|
Got mine early last week. Prolly be a while before I install it. Thanks again. |
