| Author | Message | ||
     Goldtooth |
Sold the X1 now gotta get rid of the bits and pieces. Prices are negotiable but if it gets to low, I will go to Ebay. Penske pull shock set up for 175lb rider. Huge improvement over stock. Only on for 2500 miles. Paid $875, sell $650   Showa forks from 2000 X1, rebuilt with new seals, sliders and 7.5w synthetic oil. No scratches on stanchions, no leaks. $200   White wheels off 2000 Red Racing stripe. Very good shape, few scuffs but will clean up good. Bearings are good. $250 for the pair     Stock rear pulley $30  Rear brake rotor great shape $25  Front brake caliper, painted black, brand new Lyndall Gold pads $75   Power Commander unit, I took it out when I got the bike, worked fine when in. Has all parts (that came with it) but you will need to get install directions and a new 3 wire O2 sensor. $75   Stock 2000 X1 ECM $75  Stock lower bar clamp/ dash mount $10  Stock bars, filled with lead shot and urethane for vibration dampening $25  Rear axle $20  Stock drive belt, good shape about 15K miles. Good for a back up. $50  Rear bag from a XB but fits on the X1 with a little mod for the strap to hook onto. Fabric is unglued in some places but still works. $20  Headlight with trim ring painted black. I cut the harness so I could swap lights quickly. $40  Stock dash $10  Stock signals $5  All prices DO NOT include shipping. Let me know what you want, first come first serve. Post on here, not email as I won't be able to keep track of FIFO. nate (Message edited by goldtooth on January 13, 2014) (Message edited by goldtooth on January 13, 2014) | ||
| Trouble_enabler |
I'll take the front rotor. PM'ed. Thanks Mike | ||
| Goldtooth |
Front rotor sold, thanks Mike! Let me know your offers if you are interested in the other stuff! nate | ||
| Dutch_x1 |
Interested in the wheels and tail bag Email sent | ||
| Ljm |
Interested in the side covers and air filter. Going to 20141. Will pm. | ||
| Goldtooth |
side covers sold, thanks! nate | ||
| Goldtooth |
bump, any offers? nate | ||
| Trouble_enabler |
Got the rotor, just what I needed and great packing! Thank you! | ||
| Ralph |
Would you take $40 shipped for the headlight? | ||
| Akbuell |
PM sent re shock, Dave | ||
| Phelan |
Wish I had the dough for that Penske :/ | ||
| Goldtooth |
Ralph Shipped to where? | ||
| Goldtooth |
forks sold pending sale on shock let me know your offers, gotta get rid of this stuff! nate | ||
| Goldtooth |
Pulley and rear rotor sold. | ||
| Goldtooth |
caliper sold | ||
| Goldtooth |
power commander sold | ||
| Goldtooth |
headlight sold | ||
| Emptimind |
Still got that Penske? What's the length? How hard is it to adjust rider weight? (Message edited by emptimind on January 31, 2014) | ||
| Goldtooth |
everything but the wheels have been sold. nate |
