Author |
Message |
Paulturner911
| Posted on Friday, December 27, 2013 - 03:12 pm: |
|
Im looking for a good place in South Florida to take my 05 XB12SCG to get dyno tuned via ECMspy. Any input would be great. Thanks (Message edited by PaulTurner911 on December 27, 2013) |
Ericz
| Posted on Friday, December 27, 2013 - 03:48 pm: |
|
Where are you located? |
Paulturner911
| Posted on Friday, December 27, 2013 - 04:00 pm: |
|
Sorry about that, Im trolling all the forums at once... Im in West Palm Beach. |
Itoandre
| Posted on Friday, December 27, 2013 - 06:25 pm: |
|
Maybe Unique Superbikes |
Slaughter
| Posted on Sunday, December 29, 2013 - 12:15 am: |
|
YOU have to be the one to setup and operate the ECM Spy system - it'll be a VERY RARE tuner who has ever run ECMSpy. If the tuner has never run ECMSpy, you're going to have a few hundred dollars of their learning the system if you're not comfortable operating it yourself or training them. Maybe a small dyno-tuner would work with you. You MIGHT be able to go to Dynojet.com and see if they list local operators. Dynojet Dyno Center locator (Message edited by slaughter on December 29, 2013) |
Firemanjim
| Posted on Monday, December 30, 2013 - 12:32 am: |
|
If you find a shop I can talk them through tuning with ECM-Spy. Not alot harder than a Power Commander, just that darn Learned Fuel area! |
Paulturner911
| Posted on Tuesday, December 31, 2013 - 08:06 am: |
|
I have been on Dynojet Center, no luck as far as someone familiar with my bike. I have added the race map and done the following modifications *ecm config change midpoint from.49 to .52 * Def. open loop corr. 105 to 108 and change the 3 to a 0 *cold start enrichment 260 change 97% to 100% * WOT 2500 165 to 155 o2 sensor in ecm congfig rich to .59 mid to .52 lean to .44 These were some settings someone on buell XB suggested. The bike seems to run good and I havent checked the corrected values in a few weeks, but when I was messing with it seemed to be at 100. Please feel free to email me with any suggestions by removing the xxxxxx at paulturner911@xxxxxxgmail.com Thanks (Message edited by PaulTurner911 on December 31, 2013) (Message edited by PaulTurner911 on December 31, 2013) |
Firemanjim
| Posted on Thursday, January 02, 2014 - 02:41 pm: |
|
Post screen shots of your map and I will look at it or send to me. |
Paulturner911
| Posted on Thursday, January 09, 2014 - 09:03 am: |
|
I wasnt able to upload the screen shot as it was too big. Ive sent you a PM. shoot me an email. |
B00stzx3
| Posted on Monday, January 27, 2014 - 06:27 pm: |
|
Think this dude does custom tunes for a reasonable cost here http://xoptiinside.com/ He's been in the Buell community for a long time as well. He posts here. |
|