| Author | Message | ||
     S1owner |
I did a search but could not find what I was looking for. There is a person on here that makes headers and such need to talk to you | ||
| Modified4speed |
 I bought it with strait pipes but made these because the old ones were falling off. I am looking to get a full exhaust kit or figure how to make it. I'm keeping an eye on this thread... | ||
| Serialk |
http://www.badweatherbikers.com/buell/messages/476 23/647838.html?1313526248 Albert666 | ||
| Steeleagle |
Bad Web sponsor and all around good guy: http://www.deanadamsdesigns.com/ Not sure if he's done tuber headers, but he's a good start. | ||
| S1owner |
I am not sure the person I was looking for had a couple posts within the last year with tuber exhaust looked cool could see all the raw welding | ||
| S1owner |
Correction it is Albert666 but he is over the pond which makes it hard | ||
| Pash |
Albert666 made a set of headers (to Buell Pro Race dimensions) for my S1 and I am very pleased with them... http://www.aph-performance-engineering.com/ | ||
| D_adams |
I haven't done any for tubers as of yet, only 1125 and XB's.   | ||
| Jayvee |
Those are both pretty f#@k*^g awesome. If I didn't already have 3 headers I'd want you to make me some. | ||
| Albert666 |
I can make them no problems. See my m2 headers thread Shipping is not an issue I send a lot of them to the USA plan on moving out here too | ||
| Albert666 |
ok some pics xb headers and silencer  1125 headers and system  x1/m2  honda sp1 l Ti link pipes and silencers  | ||
| Albert666 |
and one of my favourites  | ||
| Lakes |
Nice Pipes, the tuber, seems to have long pipes b4 collector, as the shock located about where this xb pipe has its muffler. also the xb frame above motor. tuber you would need to clear the tube frame. i suppose tuber pipe would perform different too? if you do make tuber pipes please post as i love my tuber! | ||
| Albert666 |
The big pic is for the x1/ m2 | ||
| S1owner |
Albert I really like the under the frame M2 headers if I wanted a header into my can raw love the exposed welds the more the better for that mechanical look what would one cost 2" | ||
| Bluzm2 |
Albert, those pipes are SICK!! Incredible craftsmanship. Well done. Brad | ||
| Albert666 |
s1owner 2" dia pipes or 2" outlet into silencer? | ||
| S1owner |
2" into silencer perferably 2 piece with the spring lock (Message edited by S1owner on December 18, 2013) | ||
| Jayvee |
The X1 / M2 headers shown look like the RACE Headers. Extremely nice! But assuming we no longer have the little "shoe" the factory Race headers use, could you perhaps show or explain the front mount of the muffler? I have the updated "Y" mount, but can't tell how that picture would fit up to the front, without the "shoe". | ||
| Albert666 |
You don't need the race shoe. The UK's best buell engineer came up with a bracket design that is superior. Maz matsell just bells Manchester | ||
| Lakes |
Do you have a close up picture of the mount, as i also have the Y mount & like it as i ride long distance on the Bike & still like to race when i can ( ride 1,000 k to race ) so mount important to me. nice work | ||
| Albert666 |
this is the only pic i have, it usually has two clamps  | ||
| Albert666 |
another pic  | ||
| Pash |
That S1 looks nice but dirty... I'll take a better picture for you Albert... | ||
| Hootowl |
Looks beefy. Sure looks like it needs the second clamp to work as intended though. | ||
| Pash |
That was a trail fit (hence trailered) when I picked them up Hootowl... |
