G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Anonymous Posted on Monday, October 28, 2013 - 12:55 am:        I just bought a 98 motor for my 2000 x1 it does not have the hole drilled for the speedometer. Any ideas? There seems to be a place in the casting. Its just not milled out. Can I get it drilled for the sensor?   Gusm2 Posted on Monday, October 28, 2013 - 01:26 am:        The 98 model would have had a drive on the front wheel and a speedo cable rather than the electronic arrangement as fitted to your X1, it could be done but at a fairly substancial cost I would imagine, also that 98 motor may be pre thunderstorm so not as powerfull as your original motor, good luck with the fix   Bluzm2 Posted on Monday, October 28, 2013 - 09:44 pm:        Why the anonymous post?   Trouble_enabler Posted on Monday, October 28, 2013 - 11:11 pm:        They made Thunderstorm motors in 98, so it might be. I don't think it's that bad, I have a front drive mechanism you can have (just PM me). You will need a speedo cable, American Sport bike has them for less than $20 and I have seen speedometers for for $25 on eBay.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: