| Author | Message | ||
     Rsm688 |
Parting out Custom 1999 M2 Cyclone Project, there are a few pics in the Bikes For Sale area of the classifieds under "Custom Tube Project For Sale" and can email pictures to interested buyers: Motor/Primary- Excellent condition, 7k miles New Mikuni HSR 42 Racing carb kit, was brand new and installed on bike about 2 months before I tore it down for the build New Choke cable New front isolator- still in box New OEM entire rear brake setup in the box (caliper, bracket, pads, etc.) New Buell RACE ECM NEW Buell OEM rear chrome pulley bolts (still in wrapper) NEW OEM Buell Rear shock (complete unit straight from the dealership including the new upgraded bracket, well has 25 miles on it, dealership has to install it for the Buell Warrant to cover it and then I drove it around 25 miles home and began disassembling the bike) Forcewinder intake and filter New Buell entire wiring harness- Old one was fine but I was building this to be a like new custom bike and wanted everything to look perfect. As I removed the old harness I used blue painters tape and taped each wire of the new harness labeling what it goes to/where to make it super quick to reinstall Custom one of a kind Billet machined shifter setup, this is a similar setup to the bankes engineering design. Shifts like butter compared to the stock setup and looks awesome Custom Billet Front Motor Mount Custom Billet front and rear passenger footpegs, super nice FRAME,SEAT, and TITLE (sold together): the subframe was shortened 6”, my buddy who is a professional fabricator/machinist custom built a CNC rear plate designed for the taillight and to align perfectly with the Ducati seat, holes for the wires and mounting bolts were machined in and welded on, I removed the steering lock (its pointless and notorious for leaking water into head bearings) and has it welded up and ground perfectly flush, I cut off the mounts for the electronics on the right side lower rail of the subframe where they are mounted for the factory (factory tail hides them, they were exposed with the ducati seat) and spent hours slowly dremeling and sanding them until it is 100% flush and looks like it came from the factory that way (cleans the rear end up a ton and looks awesome), he also welded in a plate in the center, this is where the electronics (ECM/relays) now will mount 100% hidden under the seat. The frame was then shipped out to be custom powder coated by one of the best in Candy Apple Red (seems to change color with the light from lighter to darker red and has a metallic/anodizied look to it, pictures do NO justice for how awesome it came out). SWINGARM: I spent about 3 hours slowly grinding and sanding down all of the brackets on the top of the swingarm where the factory hugger mounted (looks much better without it), the brackets for the brake lines were left. It was then also sent out to the same powdercoater and powder coated in matte black. New style/upgraded front exhaust hanger Vance and Hines SS2R exhaust New LED smoke tail light with integrated turn signals, has a comuter so you can choose various turn signals settings (flash, slow, blink, etc.)- high end tail light not a cheapo New LED front turn signals (small black with smoke lenses) HID headlight kit with ignitor, bulb, harness, etc. Custom Stenzel bar (engine brace that mounts under the tank out of view, decreases vibes and supports the motor better) LED Turn signal relay Buell M2 factory service manual MAKE ME AN OFFER on what you are interested in. Thanks, Spencer (Message edited by rsm688 on October 23, 2013) | ||
| Rsm688 |
Motor/primary just put on eBay with Buy it Now/Make an Offer pricing, price to guys here will be less than what I am asking http://www.ebay.com/itm/331050984603?ssPageName=ST RK:MESELX:IT&_trksid=p3984.m1555.l2649 | ||
| Jayvee |
PM sent. | ||
| Dammitquikgentry |
Pm sent | ||
| Jersey_thunder |
pm sent | ||
| Mytuber |
pm sent | ||
| 2003xb9r |
PM sent | ||
| Ltbuell |
...pm sent. | ||
| Rsm688 |
Sold Pending Funds: Mikuni HSR 42 Carb Billet Front Motor Mount Custom Tuber Shifter setup All emails replied too, I also have: Perfect condition OEM Buell Black Rear Wheel Rear Wheel pulley Rear Wheel brake rotor (can sell separately or together) Coil Horn Handlebar controls (ignition/turn signal, starter switch) Throttle cables And all the various brackets and mounts and all that kind of parts Had a question about the tail light, it is the OEM shape/look Buell style taillight but simply a lot more modern inside with the LEDs, integrated turn signals, and a smoke lens (It's not one of those crappy "universal" tail lights it's Buell M2/S1/X1/Ducati Monster specific tail light. The Buell's and older Ducati Monsters use the exact same tail light) Thank Spencr (Message edited by rsm688 on October 24, 2013) | ||
| Petro_freak |
Does the race ECM fit an '06 Uly ? Thanks | ||
| Jayvee |
ooh, I hate these "blind auctions"...  | ||
| Buelled |
how much for the rear tail light , a mirror one or two, and how much for the wiring I am looking to complete project myself or how much for the whole thing sent to Georgetown Texas it would go into a chopper frame and I would need everything except frame rear wheel axle swing arm let me know 512-800-3963 | ||
| Buelled |
how much for the speedo | ||
| Ltbuell |
PM sent | ||
| Rsm688 |
Motor/Primary- Excellent condition, 7k miles- $1200 New front isolator- still in box, $30 shipped New OEM entire rear brake setup in the box (caliper, bracket, pads, etc.), $85 shipped Rear brake master cylinder, line, switch, etc- $40 shipped New Buell RACE ECM- $150 shipped Mikuni HSR 42/Choke cable- SOLD Custom billet shifter- SOLD NEW Buell OEM rear chrome pulley bolts (still in wrapper) $40 shipped NEW OEM Buell Rear shock (complete unit straight from the dealership including the new upgraded bracket, well has 25 miles on it, dealership has to install it for the Buell Warrant to cover it and then I drove it around 25 miles home and began disassembling the bike) $250 shipped Forcewinder intake and filter $150 shipped New Buell entire wiring harness- Old one was fine but I was building this to be a like new custom bike and wanted everything to look perfect. As I removed the old harness I used blue painters tape and taped each wire of the new harness labeling what it goes to/where to make it super quick to reinstall- $90 shipped Custom Billet Front Motor Mount- SOLD Custom Billet front and rear footpegs (4 total), super nice, $80 shipped FRAME,SEAT, and TITLE (sold together): the subframe was shortened 6”, my buddy who is a professional fabricator/machinist custom built a CNC rear plate designed for the taillight and to align perfectly with the Ducati seat, holes for the wires and mounting bolts were machined in and welded on, I removed the steering lock (its pointless and notorious for leaking water into head bearings) and has it welded up and ground perfectly flush, I cut off the mounts for the electronics on the right side lower rail of the subframe where they are mounted for the factory (factory tail hides them, they were exposed with the ducati seat) and spent hours slowly dremeling and sanding them until it is 100% flush and looks like it came from the factory that way (cleans the rear end up a ton and looks awesome), he also welded in a plate in the center, this is where the electronics (ECM/relays) now will mount 100% hidden under the seat. The frame was then shipped out to be custom powder coated by one of the best in Candy Apple Red (seems to change color with the light from lighter to darker red and has a metallic/anodizied look to it, pictures do NO justice for how awesome it came out). $500 plus shipping (I have $800 in the custom machining/CNC work, powder coating, and seat not to mention the cost of the frame and title) SWINGARM: I spent about 3 hours slowly grinding and sanding down all of the brackets on the top of the swingarm where the factory hugger mounted (looks much better without it), the brackets for the brake lines were left. It was then also sent out to the same powdercoater and powder coated in matte black. $140 shipped New style/upgraded front exhaust hanger with bushings/hardware- $50 shipped Vance and Hines SS2R exhaust/mount- $150 shipped Black ceramic coated header, great shape, no dents/dings, includes exhaust flanges- $150 shipped Molten Orange Manta gas tank and hardware- great shape, paint is glossy and shiny with no bubbles- $150 shipped New LED smoke tail light with integrated turn signals, has a comuter so you can choose various turn signals settings (flash, slow, blink, etc.)- high end tail light not a cheapo) $70 shipped New LED front turn signals (small black with smoke lenses), $25 shipped HID headlight kit with ignitor, bulb, harness, etc.- SOLD Custom Stenzel bar (engine brace that mounts under the tank out of view, decreases vibes and supports the motor better)- $45 shipped LED Turn signal relay- $10 shipped Perfect condition OEM Buell Black Rear Wheel/pulley/rotor/tire with 500 miles- $200 shipped Rear Wheel/tire alone- $150 shipped Rear Wheel pulley- $50 shipped Rear Wheel brake rotor (low miles)- $50 shipped Coil- $49 shipped Horn- $25 shipped Handlebar controls (ignition/turn signal, starter switch)- $75 shipped for both sides Throttle cable/throttle return cable (both)- OEM, like new (I replaced the old ones with a new set when I got the bike)- $40 shipped And all the various brackets and mounts and bolts and all those kind of parts Will offer a discount for multiple items, make me an offer. Worst I can do is say no and give you a counter offer Thanks, Spencer | ||
| Rsm688 |
Oh and for those of you that sent me an email about some of the parts and did not get a response, send me one again. I had an emergency come up and had to drop everything and rush out of town for the past 5 days. Thanks, Spencer | ||
| Rsm688 |
Vance and Hines SS2R- SOLD Front exhaust mount- SOLD Horn- SOLD Pics coming this afternoon to those that emailed me | ||
| Rsm688 |
Also have: Rectifier Oil Tank/lines Breather re-route setup with lines/filter/bracket etc | ||
| Kiwicris |
Spencer, Have you still got the service manual ?? If so, how much & how much to post to New Zealand? It's my belief that you guys have various types of postage over there . . correct? I'm not interested in getting it yesterday so sending it by surface mail (the cheapest) would do as long as it doesn't cost a fortune. Just when you have a moment. Cheers, Chris in Christchurch |
