| Author | Message | ||
     Jrobey7 |
Buddy wrecked it, told me to tear it down and get rid if it! -12 Motor for grabs and all parts necessary to swap into xb9 (injector, intake, and whatever you need provided its picked up.(start bid at $800 for all engine parts) Also could help install within 50 or so miles of 20711. -has low suspension (yellow rear shock) should get front fork rebuild seals are leaking, but have been for 6months from what my buddy says. -06 ecm I believe not going with motor -clear titled frame but scratched to both sides, small dent, not too bad - low seat w strap, could be recovered 6inch tear in rear of seat ($60) plus ride - belt for sale ($60) plus ride plastics are bad but chin is only scratched on right no cracks in air box, fly or fender. Could be painted.willing to cut a deal on them I guess - tail broke off so unless you CAN weld aluminum I wouldn't recommend them.im not taking time to worry about them. front supports ripped from forks, snapped the aluminum brackets so they are in the broke section PM me for pics, but imagine a bike with the tail/seat ripped off and took a few tumbles! Looks like you pulled the tail off any Buell. Make some offers and I will go by time received in my PM email box, PLEASE tell me your offer and what you will pay for shipping | ||
| B2tomtom |
Do you have any pics of the forks and shock? What are you asking for them? | ||
| Sparky300 |
Pm sent | ||
| Reepicheep |
What year? | ||
| Jrobey7 |
YEAR 2006 says 12S but I thought the S had the blue shock? Can Anyone clarify? I know the rear yellow spring is "low" spring. I usually only deal with my Uly and that Picture sent via email only! PM me for pictures I have been on the forum for several months now and many people have had good contact with me. -Jeff Also call or text three o one -nine 19 -93 nine 1 | ||
| Rbuck53 |
I'll kick in my 2c because another member here just answered the same question for me. So, if this info is wrong...blame him! Early S models had a black spring which made the bike lower than the later S models which had a blue spring. The yellow spring is from the SCG which had the lowest seat height of the XB 12's (also the shortest suspension travel). | ||
| Jrobey7 |
Thanks a lot! ^ Yea that's what I was also told also, I think it is before they added the SCG bike I have the low seat but it needs some help, seat pan is good though and seat strap is on it | ||
| Jrobey7 |
I'm NOT putting a price on anything except for the suspension. Send me your offer and i will respond. Full low suspension has a pending sale BUT i am keeping the bike mobile for a few days so it is not coming off yet. Still taking offers. for everyone else wondering -Full XB12S motor -Straight, Not leaking swing arm with minor scratches -Clear dark grey frame and title but one tail mount is broke, could be ground down and a mount welded on. -Rear wheel/ rotor/ tire (Orange but flaking bad, good to paint or whatever) new Bridgestone tire (150-250 miles NEW, was on second tank of fuel and wreck reset the trip meter so we don't know) -Rear brake caliper & front brake caliper -voltage regulator -oil cooler & bracket - have a good ignition hand control (few minor scratches to plastic housing) throttle tube is chipped but not broken. That's only thing good from handlebars. (2 forks, rear with reservoir & triples and kickstand don't forget) are being sold together. No top clamp and bars were bent. if you want 1 fork, you must buy (2) both. Make some offers, Another member sold regular height forks Monday for $300 so I'm shooting for that plus shipping and you would get the rear & kickstand with it. Remember the front fork seals are leaking... I think it will cost about $50 to ship. But again make some offers! Thank you all for your interests | ||
| Jrobey7 |
Suspension is spoken for (pending payment) Full key set w 2 keys for lightning! Anything that doesn't hit the ground is in good condition Rider peg brackets are good if anyone is interested, same for bolt and lightning Only one peg though Email/PMs replied | ||
| Jrobey7 |
More interest responded to. * Upgrade kit to 04+ belt, tensioner and pulleys For sale now | ||
| Gnmike87 |
Did the passenger foot pegs make it? I am needing a set. | ||
| Jrobey7 |
No pass pegs, PMs replied! make offers on multiple parts! I am glad to send lots of stuff to same persons. + rear peg mounts are bad also, only good to repair, modify or experiment. + One right rider peg made it and rider peg supports are perfect! + 04+ pulley belt upgrade + Jardine pipe & mounts for sale (taking offers, little beat up on bottom but very shiny SS RT1! Bike stored inside) + 06 ecu and modified air box with servo motor. Upgrade your 03-05 xb9 or xb12 without ruining your stock air box (taking offers) | ||
| Jrobey7 |
pictures at link http://annapolis.craigslist.org/mpo/4127022717.htm l | ||
| Jrobey7 |
- Ulysses or lightning headlight case for sale $36 shipped (has a few scratches but silver reflective backing is perfect and wire is included, NO BULBS) - 06 ECM perfect condition 10k miles make a offer - | ||
| Knox |
Can you pm me a picture of the tail? I just need the right side metal piece. Yes, I can weld aluminum. Thanks | ||
| Jrobey7 |
Headlight case SOLD jardine & mounting brackets PENDING seat latch and cable SOLD Suspension SOLD | ||
| Jrobey7 |
Fender eliminator & Integrated tail light- SOLD Seat latch mount - SOLD Tilt sensor SOLD Under tray is broke and not useable Battery tray and metal bracket are not useable - RH pass peg mount scratched and had to tap peg bolt with a rubber hammer but does hold peg and is useable | ||
| Carbonfiberbones |
PM sent... I hope you still have the frame! Here's mine   | ||
| Reepicheep |
Dang bones, how did you manage that?!? | ||
| Carbonfiberbones |
Split second misjudgment. A box truck bit me. | ||
| Reepicheep |
Better the frame than your femur. Dang. | ||
| Sparky300 |
I thought you said your gf was riding it when it happened? | ||
| Carbonfiberbones |
@sparky, If you're referring to Wylie, I am his girl, and yes, I was riding it!  | ||
| Sparky300 |
Ah, I only said so because I remembered the pic from the other forum. Glad you're ok and post pics when you get it rebuilt. GL | ||
| Jrobey7 |
Looks like frame and swing arm are pending lol Only needs the frame but they are going together regardless, I don't want them sitting around. SO if someone wants to speak up for a cheap, slightly rashed, but straight dark color 06 swingarm? it will drop price of frame whatever I NET from it. Like think 1/2 or 1/4 of what is listed on eBay. Like around $30 to 35 plus shipping gets it, or pick it up. Goes with the bridge and bolts. | ||
| Jrobey7 |
Broken Seat Pillars SOLD 04+ upgraded Pulley & belt kit SOLD scratched Fly screen SOLD still have complete engine pulled and available as top or bottom end, timing cover and clutches/primary covers. Xb12 gearing Still have a low seat but it is torn and plastic clip for seat hold (front) is broke. still mounts in seat latch and works fine mounted on my old XB9. | ||
| Jrobey7 |
Header ---- SOLD | ||
| Petro_freak |
Do you have a rear cooling fan similar to the one on the XB12X Ulysses ? |
