Author |
Message |
Italialaw
| Posted on Monday, August 19, 2013 - 09:46 pm: |
|
I have a question regarding the above seat. I am going from my corbin to the custom seat on my 98 s3. I noticed that the corbin's front tab slide's under the frame, but the custom seat's front tab seems to want to slide under the plastic rear fairing (which is located just above where the corbin front tab slides in). Is this how the front tab on the custom seat is installed on the bike? My manual seems to state otherwise, but my stock seat seems to fit this way as well. Also, it seems if I wanted to slide the custom seat's front tab under the frame I'd have to bend it down slightly. Thank you for your time in advance. |
Essmjay
| Posted on Monday, August 19, 2013 - 11:34 pm: |
|
I bend them down while sliding under the metal. |
Terrycoxusa
| Posted on Sunday, August 25, 2013 - 08:09 pm: |
|
do you want to sell your corbin? |
Italialaw
| Posted on Monday, August 26, 2013 - 09:38 pm: |
|
No I'm keeping it Terry |
|