Author |
Message |
Triman023
| Posted on Thursday, August 15, 2013 - 11:36 am: |
|
OK my last post got nothing.... So, if I want to rebuild the Brembo rear brake caliper, what size o ring do I need? Also, where can I get the part? |
Hootowl
| Posted on Thursday, August 15, 2013 - 11:42 am: |
|
Try American Sport Bike. They've got a rebuild kit for the front, they may be able to dig up something for the back. |
Triman023
| Posted on Thursday, August 15, 2013 - 03:28 pm: |
|
OK Talked to American Sport Bike. NO PARTS for the rear S2 brake. No rebuild parts from Brembo, its a throw away caliper. Twin Motorcycles in the Netherlands has a replacement kit for about $277. The other option is a 1998 Buell caliper, will check that out. Easier to get parts for my 1969 Triumph.... |
Basti
| Posted on Thursday, August 15, 2013 - 04:45 pm: |
|
Hi Brembo parts are available, KTM used the same brake. Just have a look at ebay. |
Hootowl
| Posted on Thursday, August 15, 2013 - 05:32 pm: |
|
You could try disassembling the caliper, and then matching the o rings for size at at NAPA, or someplace that sells a variety of them. Just a thought. |
Triman023
| Posted on Thursday, August 15, 2013 - 06:55 pm: |
|
Basti: Where would I look for that Brembo part, so far its a closed door? Yes, it is just an o ring. Will try to bleed it and if that doesn't work take the o ring out and measure it. Getting cranky in my old age... |
Steveford
| Posted on Thursday, August 15, 2013 - 07:47 pm: |
|
http://www.brembo.com/en/bike/Racing/distributors/ Pages/Street-products.aspx You just need the small O-ring that seals the two halves together? |
|