G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Sportrider99 Posted on Monday, July 22, 2013 - 12:27 am:        Was looking around on the site couldn't find anything about this. I am considering trading out the front end on my M2 for that of an XB. I don't have a XB wheel in front of me so I can't do the measurements myself. Does anyone know if a M2 rear wheel can be swapped out for one off of an XB?   Tll130 Posted on Monday, July 22, 2013 - 12:34 am:        xb rear wheel specs diameter 17 and width 5.5 made out of aluminum does that help any?   Sportrider99 Posted on Monday, July 22, 2013 - 01:15 am:        I'm more concerned about the spacing and the wheel bearing size. Also if there is an offset for the disc on the XB Rotor and if the bolt spacing is different. I'll be replacing the whole front end so I'm not worried about the front just the rear.   Tll130 Posted on Monday, July 22, 2013 - 01:25 am:        What size is the rear m2 wheel? Im assuming that they would work together just fine if they are the same size. But then again I don't own either a Xb or a m2 so my word isn't 100 pct. but I'm sorta wondering if you would even have to change the rear wheel if it is the same diameter of the Xb. Edit: after posting I realized that hey you would want the 2 rims to match maybe? Lol so It's officially out of my league my only thought would be maybe maintenance manual for the Xb might have the information you need on the rear wheel if no one can help you here (Message edited by tll130 on July 22, 2013)   Brother_in_buells Posted on Monday, July 22, 2013 - 04:59 am:        Below on this page is a pdf with the spacer sizes for rear xb wheels. http://www.badweatherbikers.com/buell/messages/476 23/626840.html And if you use the search function ,there is a lot of info to be found (but be patience sometimes it takes a little time   Oldog Posted on Monday, July 22, 2013 - 08:59 am:        This came up recently the short answer is yes spacers and watch the tire profile swaps that have been done include wheels swing arm, and front clip complete with wheel IDK if you can mix & match front wheels as the XB series have the ZTL brakes and mounting caliper carriers would be a pain search joesbuell, and goldtooth   Analbeard Posted on Monday, July 22, 2013 - 12:07 pm:        http://www.ebay.com/itm/Buell-S1-M2-X1-S3-S2-S1W-t o-XB-Rear-Wheel-Conversion-Spacers-/141020776586?p t=Motorcycles_Parts_Accessories&hash=item20d57e488 a&vxp=mtr Spacers.   Natexlh1000 Posted on Monday, July 22, 2013 - 03:27 pm:        Rear XB wheel is worst part of the XB line. Two bearings instead of three (Until 2010 redsign) Water gets in. The front wheels on the XBs with the fancy ZTL brakes are sweet though.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: