Author |
Message |
Doge
| Posted on Sunday, October 21, 2012 - 01:21 pm: |
|
Parting out my 2000 Blast. This Blast was my baby. In it's previous life, it set the land speed record for a single cylinder engine (not the engine currently on it.) Plaque is still on the frame. Here is the description of it a few years back, before I bought it. Before the crash, it still looked just like this. http://bcrider.com/blast4sale.html An old woman pulled in front of me and I dropped and slid into her side. Front fork and header are toast, as well as the tach, ignition, and headlight assembly. Everything else is usable. Notable features are: (Pictures included below) Millennium Cylinders Big Bore kit. The plastics say 44 Magnum on it, but I don't know how to check to see which kit is actually on it. Not sure how many miles were on this motor, but the odometer had just over 10,000 miles when it was put down. Screaming eagle electronic ignition. V&H exhaust can. Pro Series Intake. Custom silver painted plastics with faint ghosted flames. Have scratches and dings, but nothing major. Crossroads Rearsets: Left side has bent peg. The main structure is still in tact, if anyone is interested. Cut stock rearset arms, to allow for aftermarket rearsets while still having back passenger pegs. Posting this is mainly as a feeler of interest. I'd prefer sell to fellow Blastards before posting things on other sites. Thanks for looking!
|
Gearheaderiko
| Posted on Sunday, October 21, 2012 - 03:40 pm: |
|
Dibs on the SE ignition module if it still works. |
Gearheaderiko
| Posted on Sunday, October 21, 2012 - 03:43 pm: |
|
PM sent. How did you fair? |
Gearheaderiko
| Posted on Sunday, October 21, 2012 - 03:45 pm: |
|
I may be interested in some other stuff, but the ignition is my main concern. |
Doge
| Posted on Sunday, October 21, 2012 - 09:21 pm: |
|
Hi Erik. A little shaken up, but I'm ok. Thanks for asking! Let me know if you're interested in anything. (Message edited by doge on October 21, 2012) |
Sycho
| Posted on Monday, October 22, 2012 - 02:40 am: |
|
Interested in the Pro Series Intake if Erik hasn't spoken for it. |
Doge
| Posted on Monday, October 22, 2012 - 02:52 am: |
|
Hey Sycho, I'm looking for $200 +shipping from Oregon. Let me know if you're interested. Thanks! |
Crackhead
| Posted on Monday, October 22, 2012 - 09:42 am: |
|
I am interested in the Cross Roads rear seats and the modified stock peg arms. Also, is the tach for sale? |
Sycho
| Posted on Monday, October 22, 2012 - 10:50 am: |
|
Ouch, $200.00+ is too steep for me, thanks anyways. Maybe you should hang onto your parts for your next Blast, just a thought. Glad your okay though. |
Doge
| Posted on Monday, October 22, 2012 - 12:42 pm: |
|
Hi, Crackhead. The rearsets are spoken for by one person ahead of you (by 15 minutes!). If the deal does not happen, I will contact you first. Are you still interested in the passenger peg arms? Syncho, Sorry to hear that. I'd like these parts to go to good homes where they will be used. My Blast just mostly sat in the garage... waiting. Thanks! |
Bluedak
| Posted on Monday, October 22, 2012 - 04:47 pm: |
|
How much for the V&H? |
Doge
| Posted on Monday, October 22, 2012 - 05:17 pm: |
|
Hi Bluedak, $100 +shipping from Oregon. Note: It is the can only and it has shallow scratching on the underside. Let me know if you're still interested. Thanks! |
Crackhead
| Posted on Tuesday, October 23, 2012 - 12:21 pm: |
|
I am not interested in the passenger arms only. |
Doge
| Posted on Tuesday, October 23, 2012 - 05:28 pm: |
|
OK. Thanks, Crackhead. Also note, I am posting prices that are referenced from other sales on BWB. I'm open to any fair offers. You just have to ask. |
Debueller
| Posted on Monday, October 29, 2012 - 12:32 pm: |
|
Steve, I made the trip to and would like to pickup the rearsets but cannot get hold of you via email or phone. I'm leaving town in a couple of hours so if you still want to make a sale, call me at 253-797-2915........... Jerry |
Ohboyrico
| Posted on Sunday, November 11, 2012 - 03:59 pm: |
|
Is V&H still avail? |
The4ork
| Posted on Wednesday, December 12, 2012 - 04:36 pm: |
|
is the rest of the bike up for parts? i need an entire rear wheel assembly, tire, sprocket |
Cvc
| Posted on Wednesday, December 26, 2012 - 12:46 pm: |
|
PM sent, I haven't been lurking around here for a while too busy with the shop but I blew a head gasket in November and still need to tear it down but some go fast parts would help motivate me |
Darth_villar
| Posted on Saturday, March 30, 2013 - 12:46 am: |
|
Are the engine and exhaust available? |
Cvc
| Posted on Sunday, April 21, 2013 - 09:37 pm: |
|
pm sent |
Hendricksc7
| Posted on Friday, May 17, 2013 - 07:23 pm: |
|
anything left? |
Racer66
| Posted on Tuesday, June 25, 2013 - 01:10 pm: |
|
HAVE A FUNCTIONAL GAS CAP |
Crazyblasterm2
| Posted on Wednesday, July 24, 2013 - 04:37 pm: |
|
Is the intake still available? thanks |
Slabber
| Posted on Wednesday, August 14, 2013 - 08:55 am: |
|
Assuming the intake off this bike already sold, there is one available currently for a good price here: http://buellridersonline.com/forum/showthread.php? t=8328 |
|