Author |
Message |
Aj2010
| Posted on Monday, May 27, 2013 - 01:53 pm: |
|
Hi guys, well re-assembling my bike after the crash of 2011. I found a bit more damage. My rear intake manifold was also cracked. I have an early production 09 R and since I was buying a pair of intakes and spare pressure sensor, injectors etc from e-Bay, I thought I had best go newer incase my bike had the 08 old design intakes. I bought ones from an 09 CR and the manufacture date on them is sept of 06 (a year older then the one being replaced) My question is how can this possibly be the newer re-angled injector intake? Other numbers 267475 pa6.6 gf30. Visually I could not tell the difference. I was concerned that my early production 09 may have gotten the old 08 style intakes as the swingarm on my bike did not have the lift bobbin mounts cast in, they were welded on. Any one know for sure what numbers would be on the new design vs. old design intakes? Thanks for any help guys. |
|