G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   S1owner Posted on Saturday, May 04, 2013 - 09:13 am:        Ok so I got this off ebay thought it would be a thin plate but it is almost 3/8" thick solid brass and heavy so where to mount? I was thinking the center of my air cleaner   Ratbuell Posted on Saturday, May 04, 2013 - 09:49 am:        It's designed to replace your timing cover. Look down from the air cleaner. It's where the headpipes meet and says "Buell S1 Lightning". Factory covers are installed with rivets; most folks change to 10-24 screws for easy service.   S1owner Posted on Saturday, May 04, 2013 - 10:21 am:        Yep i realize where it is supposed to be but I think with the weight I want to bolt it in place not screw think the vibs will result in lose of bling!   01x1buell Posted on Saturday, May 04, 2013 - 03:45 pm:        i would just put it where it was meant to be, and tap the steel plate underneath and use bolts to secure it.   Coxster Posted on Saturday, May 04, 2013 - 05:55 pm:        I'd add some loctite 222 or 243 as well   01x1buell Posted on Saturday, May 04, 2013 - 07:56 pm:        and that as well, good call.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: