Author |
Message |
B1rdman
| Posted on Sunday, April 28, 2013 - 03:24 pm: |
|
I swear I tried searching but couldn't find the answer.. |
01x1buell
| Posted on Sunday, April 28, 2013 - 03:31 pm: |
|
underneeth the seat on left side by fuse box. |
B1rdman
| Posted on Sunday, April 28, 2013 - 03:42 pm: |
|
I swear I looked there and didn't see it.. |
01x1buell
| Posted on Sunday, April 28, 2013 - 03:47 pm: |
|
can u post a pic of the underseat area |
01x1buell
| Posted on Sunday, April 28, 2013 - 03:47 pm: |
|
pm me phone number, i can call to help . |
Pash
| Posted on Sunday, April 28, 2013 - 04:16 pm: |
|
For X1 - RH side of the headstock up to MY 2000. Under the seat, LH subframe rail on MY 2001 onwards. |
Harleyelf
| Posted on Sunday, April 28, 2013 - 04:28 pm: |
|
What Pash said. Your plug should be right under the gas tank, two or three inches behind its front right edge. There's a clip mount welded to the frame before painting. The connector clips to it or is within reach of it. |
01x1buell
| Posted on Sunday, April 28, 2013 - 04:30 pm: |
|
that is what i was going to say once i saw he had a 99. |
B1rdman
| Posted on Sunday, April 28, 2013 - 05:57 pm: |
|
I have a 2000 Must be by the gas tank then since I didn't see it anywhere in the back of the bike.. |
B1rdman
| Posted on Sunday, April 28, 2013 - 05:58 pm: |
|
Ah of course I forgot to mention what bike I had: 2000 X1. Sorry |
Two_seasons
| Posted on Sunday, April 28, 2013 - 06:40 pm: |
|
My '99 and '00 both have the DTC plug coming out on the right side by the fork tube and from under the gas tank area. |
Jramsey
| Posted on Sunday, April 28, 2013 - 06:44 pm: |
|
|
B1rdman
| Posted on Sunday, April 28, 2013 - 07:10 pm: |
|
Ah-ha! Thanks jramsey for the pic, and everyone else for their help. :-) |