G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Wesleyb82 Posted on Monday, February 04, 2013 - 02:38 pm:        I want to make my 97 M2 louder. Before I spend $600 on a drummer I'm thinking about taking a 1-3/4" hole saw to the rear of my stock muffler, while its still mounted, on the opposite side of the current stock outlet, on the side of the can. Or maybe start smaller and make it larger later. From what I read I might loose some low end torque, which I think I can deal with, but I have only found a few posts on this- not sure what that says. Is it going to sound like shit? Would I need to add a pipe for the outlet? If I didn't what would be the consequences? Anyone have some first hand experience on this?   Jim2 Posted on Monday, February 04, 2013 - 05:17 pm:        Buellistic has done this. Ask him for a PM   Wesleyb82 Posted on Monday, February 04, 2013 - 05:21 pm:        Lol hes the one who planted the seed! I'm looking for opinions on the subject   Jim2 Posted on Monday, February 04, 2013 - 05:49 pm:        If I remember right he says he didn't do a dyno test to verify performance. He left new outlet tube a little long to leave room for tuning and also made it so it can be capped. Supposed to sound close to stock if your not getting on it and supposed to sound nicer when getting on it. I have some info he provided me. I really want to do this too but I'm waiting for you to do it and report back

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: