Author |
Message |
Figorvonbuellingham
| Posted on Saturday, January 19, 2013 - 10:06 am: |
|
I recently looked at the rotor upgrade I bought last fall and was pretty disappointed. There are some parts of it with heat marks, the epoxy looks extremely brittle. I wouldn't purchase this if I saw it first. I'm going to take mine to work next week and set up a machine to perform this operation. My rotor is in much better shape. I guess ill leave this on the shelf for an emergency. What a waste of money. |
Zac4mac
| Posted on Saturday, January 19, 2013 - 10:57 pm: |
|
PIX? I highly doubt EBR would have shipped anything of questionable functionality. EBR doesn't drill/machine the hole, it's done via wire-EDM. I've replaced 2 rotors with EBR modified ones, both looked beautiful. Zack |
Theshinenz
| Posted on Sunday, January 20, 2013 - 04:44 am: |
|
don't know why you would worry as long as it functions as it should do....you dont see the part anyway. |
|