G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Serialk Posted on Friday, January 18, 2013 - 01:01 pm:        Okay I have been away for a month. Now im back to put my bike together and my removable side plate that I got back from the platers has damaged the roll pin that lines up the rear iso.... part number is 16270-94y supercede to k0506.2A Deeleys has 0 stock and I could wait for a month or two to see a 60 cent piece... so my question is. Any one know of another source? its like a 60 cent roll pin. there has got to be another way! Any help is appreciated. This is all I need to get my bike on two wheels!   Natexlh1000 Posted on Friday, January 18, 2013 - 01:05 pm:        If you get it out and take it to the hardware store, I'll wager it's a standard part. They didn't look special to me.   Serialk Posted on Friday, January 18, 2013 - 01:15 pm:        i know. I wish i had it to take it to the hardware store but the platers cut it off... i know not pleased... its flush with with sideplate. i need to drill it out   Akbuell Posted on Friday, January 18, 2013 - 01:35 pm:        Since it is a roll pin, you might try measuring the depth of the hole your stub is in w/ a length of wire, then the depth of the hole in the isolator to get overall length. Measure the dia of the stub (before drilling) for the O.D. With the dimensions, the hardware store or machine shop, ect should be able to help. Hope this helps, Dave   Jim2 Posted on Friday, January 18, 2013 - 01:37 pm:        Hold drill bits up to it to determine the correct size. Then take the drill bit to the Auto Parts store or H/W store and get new roll pin. The correct size will be a very small fraction larger than the hole in the frame for a tight fit.   Serialk Posted on Friday, January 18, 2013 - 01:41 pm:        off to the local hardware store to figure this out. thanks for the tips and input!   Pash Posted on Friday, January 18, 2013 - 01:51 pm:        I think I have a new one somewhere, I will try and dig it out and give you the measurements...   Serialk Posted on Friday, January 18, 2013 - 01:57 pm:        that would be awesome if you could Pash   Buellistic Posted on Friday, January 18, 2013 - 02:56 pm:        ACE HARDWARE is the place !!!

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: