G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Purpony Posted on Tuesday, December 11, 2012 - 01:03 pm:        If I put a set of XB heads on my tuber... do i stick with Tuber push rod covers or XB? thanks   Jayvee Posted on Tuesday, December 11, 2012 - 01:51 pm:        What would hold the bottom end of the xb plastic?   Pash Posted on Tuesday, December 11, 2012 - 03:00 pm:        Tuber tubes. That's what I have on my two XB headed S1s.   Purpony Posted on Tuesday, December 11, 2012 - 03:34 pm:        Thats what i was wondering. Since i have not seen XB heads yet, i was wondering if the XB heads would except the Tuber tubes... lol. thanks for the input (Message edited by purpony on December 11, 2012)   Buellistic Posted on Tuesday, December 11, 2012 - 04:26 pm:        colapseable push rod covers will fit ... Do not change to adjustable push rods as the push rods are heaver and if adjustment ever backs off which is the other reason ...   Brinnutz Posted on Tuesday, December 11, 2012 - 05:57 pm:        I used stock pushrods and the chrome stock styled tubes with my XB top end. No need for adjustable unless you're running some nasty cams.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: