| Author | Message | ||
     S1owner |
This is My 96 S1 Top Triple Tree I want to put stock style bars on it but as you can see it has no lower mounts for the bars. Is there lower bolt on mounts for this piece? need some help I do not want to replace the whole piece [IMG]http://i1148.photobucket.com/albums/o578/s1owner/The%20Lightning/IMG_0481.jpg[/IMG] (Message edited by s1owner on November 22, 2012) | ||
| S1owner |
Ok so I can not get the link to work ARGGGGGGGGGGG | ||
| S1owner |
[IMG]http://i1148.photobucket.com/albums/o578/s1owner/The%20Lightning/IMG_0481.jpg[/IMG] (Message edited by s1owner on November 22, 2012) | ||
| Sportyeric |
http://i1148.photobucket.com/albums/o578/s1owner/T he%20Lightning/IMG_0481.jpg No need to say image because its not. Its just a link, which seems to be created automatically. (Message edited by Sportyeric on November 22, 2012) | ||
| Jramsey |
 | ||
| Sportyeric |
Show-off. But still no input. Does a stock S1 have the lower handlebar clamp integrated into the triple-tree casting? | ||
| S1owner |
Thats what i am trying to figure out because if not i need to finf the bolt on pieces | ||
| Cheez2158 |
S1 owner if it would help my 97 is torn down andI can email u pics of the top triple and handle bar assy | ||
| S1owner |
Cheez that would be great is your bottom bar mounts cast into the triple or do tgey bolt on like my pic | ||
| Ratbuell |
Stock trees were all cast-in mounts, bar sits on tree, top clamp bolts directly to triple tree to hold the bars on. Only difference was the S2, which has true clip-on bars that clamp directly to the fork tubes, and later XB-R and 1125R trees that have two separate, straight bars that thread into the tree with no riser or clamp. | ||
| Cheez2158 |
Mine bolt on I to the tree. | ||
| Cheez2158 |
From the bottom . I had to go look . There is a larger bolt (5/8) or better holding each bottom clamp onto the tree. | ||
| S1owner |
Cheez thats exactly how my risers bolt on please get me a pic of the unit it will help me see what i am missing | ||
| S1owner |
From what i can tell they bolted on through 97 and in 98 the were cast tith the tree | ||
| S1owner |
Just looked in the manual they are seperat pieces named appropriatly lower handle bar clamp now does antone have a part number? | ||
| Cheez2158 |
S1 owner sorry it took so long ,holiday and then worked today i can send u pics just need an email address . Cheez. | ||
| S1owner |
K.paige@charter.net | ||
| Pash |
From an S1 owner to an S1owner  (Message edited by pash on November 24, 2012) | ||
| Pash |
And the part numbers...  | ||
| Pash |
New part numbers: LH N0347.9 RH N0346.9 | ||
| S1owner |
Pash thank you i did find it in the manual just needed the part numbers now i need to find the parts | ||
| Pash |
I think they are discontinued, but I believe Vintage Parts have them. Any dealer should be able to order them in for you. I would think this S3T top yoke would fit: http://www.ebay.co.uk/itm/97-BUELL-THUNDERBOLT-120 0-TOURING-S3T-TRIPLE-CLAMP-21-/350588436599?pt=Mot orcycles_Parts_Accessories&hash=item51a0b30077 | ||
| S1owner |
Thank you | ||
| S1owner |
Vintage does have them so the site says but would like to get them used!!!! Anybody?????? | ||
| S1owner |
Ordered from vintage and on their way! $100 for a pair wow but rare part so it is what it is! |
