Author |
Message |
Fuscat
| Posted on Wednesday, January 28, 2004 - 12:22 am: |
|
Jsunstar you must have me confused! I was interested in the Joke Machine Sprocket cover. If you can email me at dfugate@@birch,com. (remove one of the @'s and replace the ,) Thanks |
02buells3t
| Posted on Wednesday, January 28, 2004 - 12:55 am: |
|
Jsunstar, I sent the message about new enough. Yeah, it is quite the cost, but I thought I would pass it along anyway... |
Jsunstar
| Posted on Wednesday, January 28, 2004 - 01:11 am: |
|
sorry fellas, like i said my comp was down, i talked to a few folks and had to guess who was who... i get corn-fused in my old age (or was that just the beer?) i still have the sprocket cover, i have yet to get some pics, ill try to get to it tomorrow... thanks all yinz guys. jason |
Fuscat
| Posted on Wednesday, January 28, 2004 - 07:28 pm: |
|
Jsunstar no worries! How much you asking for the sprocket cover? |
Lake_bueller
| Posted on Thursday, January 29, 2004 - 11:27 am: |
|
Looking for a wiring harness for an S1. I don't need the ignition module. I also have an S3 frame for sale in the BWB classifieds for anyone that may be interested. awinefan@hotmail.com |
Ferris
| Posted on Thursday, January 29, 2004 - 09:05 pm: |
|
S1 gauge bezel (the aluminum piece that holds the gauges). FB |
Kent_c
| Posted on Friday, January 30, 2004 - 08:25 pm: |
|
I need triple trees for an inverted front end. I bought the forks out of a pile of parts from a totaled bike. I didn't bother asking what year the bike was. I assumed that the front ends didn't change from year to year. Was I right ? Any way somebody give me a holler with info, part or both. \clipart Kent @ cwildbunch5@aol.com{bash} |
Rocketman
| Posted on Saturday, January 31, 2004 - 04:28 am: |
|
Rocket needs these parts to rebuild his famed S1W back to its former glory. Your help appreciated with cash dollars your direction. stock bore AAC cylinder Wiseco forged piston to suit AAC cylinder (W5731 I1407* 4662PS stamped on crown) Carbon fibre front hugger S&S rods and crank pin Rocket |
Jsunstar
| Posted on Saturday, January 31, 2004 - 04:39 pm: |
|
I have been looking for a set of triple trees from an early S2 for ever... i know someone out there is hoarding a set! come on! come off with them!... this is for a good cause! im looking for the machined aluminum ones, not the cast ones. (i already have those) i want these cause they have the flush top. I am not using the handlebar clamp and its in the way... if I find a set of ones for s2's I will have a set of cast s1 ones for sale...(KENT C, YOU GET THAT?) please, help a guy with a set of trees!!!!! jason pikksburg yinz |
Blasterd
| Posted on Saturday, January 31, 2004 - 11:39 pm: |
|
Somebody please trade me a different intake for my hypercharger (prefer forcewinder), it is banging the hell outta my knee. Ken |
Awprior
| Posted on Saturday, January 31, 2004 - 11:39 pm: |
|
Ferris, I have one of those sitting on my desk. Shoot me an email@ awprior@yahoo.com |
Ferris
| Posted on Sunday, February 01, 2004 - 12:25 am: |
|
thanks Alex, my computer is down right now (i'm "borrowing" Denise's), hope to be back up tomorrow and will ping you. thanks again FB |
Firemanjim
| Posted on Tuesday, February 03, 2004 - 01:42 pm: |
|
Jsunstar,good luck finding the billet triple clamps,they only came on very early build S-2's and I am pretty sure anyone who has them will keep them(Like me).But I will sell you the whole bike equipped with the clamp you are looking for.$3700.00 for sweet S-2. |
Henrik
| Posted on Tuesday, February 03, 2004 - 08:37 pm: |
|
Black XB-R bodywork; I now have a set of Blue XB-R bodywork, that I'd like to trade for a set of Black bodywork. Henrik |
Rocketman
| Posted on Tuesday, February 03, 2004 - 08:41 pm: |
|
Green backs your way if you have any of these...... stock bore AAC cylinder Wiseco forged piston to suit AAC cylinder (W5731 I1407* 4662PS stamped on crown) Carbon fibre front hugger S&S rods and crank pin Rocket |
Firemanjim
| Posted on Tuesday, February 03, 2004 - 08:41 pm: |
|
OK,I give up.What are you doing with XB bodywork--and where's the rest of the bike???? |
Jsunstar
| Posted on Wednesday, February 04, 2004 - 12:53 am: |
|
i know they are hard to find, i thought id start here. i am looking for another s2 or maybe an s1 but i spent the loot on a trailer pulling truck to get me to ther track... whats your vin? im 1995 # 145. i know the early ones only had the forged trees... ill keep ya in mind!
|
Jsunstar
| Posted on Wednesday, February 04, 2004 - 12:57 am: |
|
which s2 you talking? the one in the pic in your profile? if so, its sold! jh |
Buelliedan
| Posted on Wednesday, February 04, 2004 - 08:49 am: |
|
jh, thats his race S2 not his street S2. |
Henrik
| Posted on Wednesday, February 04, 2004 - 08:58 am: |
|
Fireman: click here |