| Author | Message | ||
     Mike1125r |
I'm just waiting for a few parts. I should have the bike done by this weekend.     | ||
| Blackflash |
Very impressive. | ||
| Froggy |
Needs more chrome and a 300 rear tire  I bet that swingarm will help a ton with your launches. | ||
| Redbat |
Very nice. Where can I get one like that? Did you build it or have it built? More info please! | ||
| Buelltech6 |
copy cat! | ||
| Buelltech6 |
clearance issues? | ||
| Mike1125r |
Not as of yet I will have it on the bike by thursday. Did you have any issues? | ||
| Sknight |
That's a Hayabusa wheel isn't it? | ||
| Mike1125r |
Yes its a busa wheel | ||
| Littlebutquick |
I'm thinking of a number the number 9 comes to mind .go mike  | ||
| Buelltech6 |
no i did not have any clearance issues but mr bracing was above the swingarm and the shock mount was a little taller | ||
| Buelltech6 |
littlebutquick- i like your swing arm the best. probably wieghs half wat mine wieghs.whats your fastest time so far, since i have been out of the loop for so long. im making a come back this spring hoping to improve on the 9.78. and most importantly get it consistant at that number | ||
| Mike1125r |
I shouldn't have any clearance issues we digitized the stock arm so all the deminsions should be right on. Buelltech most of your high end swing arms, mr bracing is on the bottom not the top.So not really a copy cat thank you for noticing. (Message edited by Mike1125r on March 01, 2010) (Message edited by mike1125r on March 01, 2010) | ||
| Buelltech6 |
i said copy cat cause its the same piece as mine you painted it the same. and used all the same pieces. not a big deal not mad or anything just a little joke. | ||
| Mike1125r |
Thats actually the oem powder coat I used. Is cool buelltech we all have a lot of time and money in our bikes. Were all in the same boat here and hope the best for everybody to reach there goals with there projects. I'm all about crushing liter bikes so lets all stay in tune and keep on crushing!!!  | ||
| Buelltech6 |
wit you 110% | ||
| Littlebutquick |
BUELLTECH 9.92 ET AT 140.71MPH STOCK WHEEL BASE NOT RUN NEW SET UP AS SNOW RAIN SLEET CAN'T WAIT TO TEST IT | ||
| Lastonetherebuys |
has any one heard if EBR is or is going to be developing parts for the drag racers that ride buells? (Message edited by lastonetherebuys on March 01, 2010) | ||
| Slypiranna |
Excellent job Mike! Hopefully we can hook up after this snow melts! Regards, m&m | ||
| Mike1125r |
Thanks Sly sounds like a plan. | ||
| Buelltech6 |
i spoke to mike at ebr about suspension for my pile. he is going to get back to me on that. but they already offer motors with 180hp. with that and a swing arm you wont really need much more to drag it out.its ll about money at this point. | ||
| Buelltech6 |
littlequick- what gearing are you going to run | ||
| Lastonetherebuys |
I guess all they are missing from EBR is a long swing arm ands a suspension for the drag race guys out there | ||
| Littlebutquick |
buell tech stock gearing to start with 17 /45  to get a base line then gear it down bit by bit .im already in 6th at the top | ||
| Littlebutquick |
the sun has been out all week hope its dry for test n tune on sunday i want to play | ||
| Buelltech6 |
i had played with gearing and tires so much last season. i think im going to start over when the weather breaks. 18/45 was good with shinko but when i went with mickey i lost some snot up top. | ||
| Littlebutquick |
IM RUNNING THE HARDER COMPOUND MICKY T NOT THE ONES THE SUPER STREET GUYS RUN .WEATHER STILL LOOKING GOOD  | ||
| Fugitive81 |
hey mike who made the swing arm for you? | ||
| Deanh8 |
who made the swing arm |
