Author |
Message |
Zoedogg1
| Posted on Tuesday, January 06, 2009 - 12:45 am: |
|
So I was thinking about replacing my banjo bolts with Speed Bleeder bolts to make bleeding that much easier. But what size Speed Bleeders do I need? If anyone has used these let me know.. I've got an '04 XB12R. |
Baal
| Posted on Tuesday, October 27, 2009 - 10:25 pm: |
|
I'd be curious about this as well. Speed Bleeder doesn't list any fitment for Buells. |
Buell_bert
| Posted on Wednesday, October 28, 2009 - 02:32 am: |
|
I think for the M2 Cyclone's it is a 8mmx1.25 and part #03-6080 from Goodridge. Not 100% but they must be because they are with my M2 spare parts. |
Skntpig
| Posted on Tuesday, December 15, 2009 - 10:18 am: |
|
Give them a call. They have it for your bike but it might not be listed. Wow, old thread. At least it will be here for someone that searches |
Baal
| Posted on Wednesday, December 16, 2009 - 01:40 am: |
|
I emailed them, and they didn't know for sure. Go figger. |
Buell_bert
| Posted on Wednesday, December 16, 2009 - 07:25 pm: |
|
Just contact Goodridge and also take the bleeder out or order a new one and measure it. I know they have them. Thats what I did for the M2's. I do not know about the XB's. Doing a factory upgrade is not bad but doing a custom job really challenges you. |
Shaolinwind
| Posted on Monday, October 15, 2012 - 05:45 pm: |
|
Buell_bert - what year M2 and what size if you know? I have a 97 M2 that I need to get replacement for. |
Buell_bert
| Posted on Monday, October 15, 2012 - 07:09 pm: |
|
Darn, you owe me a beer. By sheer luck I kept them in the original package. Plus I had to dig for them. Just like the other post and they should work on your "97". I had a 2000 and have a 2001 M2. I also dug out a spare caliper and made sure it fit. Speed bleeders by Goodridge 8mm x 1.25 Part# 03-6080 My brother used to work at S&S and turned me onto them. Good Luck. |