G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Jeepnh Posted on Thursday, October 04, 2012 - 04:44 pm:        Hopefully 2 pix uploaded. Looking for info on 4 vents in top of rear fender, but are blocked/capped under seat. What is proper configuration? 2010 Uly XT. Thanks.   Desert_bird Posted on Thursday, October 04, 2012 - 04:51 pm:        ... anchor points to hook the ends of bungee cords if you choose to tie stuff down on your pillion seat (Message edited by Desert_bird on October 04, 2012)   Ulynut Posted on Thursday, October 04, 2012 - 04:52 pm:        Those aren't vents. Those are attachment points for bungee cords.   Ulynut Posted on Thursday, October 04, 2012 - 04:53 pm:          Treefrog Posted on Thursday, October 04, 2012 - 04:56 pm:        Those are anchor points for bungee cords or an elastic cargo net to hold stuff onto the seat or triple tail.   Treefrog Posted on Thursday, October 04, 2012 - 04:57 pm:        Man, I type too slow.   Britchri10 Posted on Thursday, October 04, 2012 - 05:53 pm:        I thought they sucked air away from the rear wheel & redistributed it into the void between the fender & the seat to: A) Cool the ECM. B)Provide a positive pressure down force effect on the rear wheel at speed! I could be wrong though. (They could be so you can hook bungees into them....) JKG. Chris C   Electraglider_1997 Posted on Thursday, October 04, 2012 - 06:09 pm:        These are vents - see photos http://www.badweatherbikers.com/buell/messages/142 838/295156.html Never have had a problem with ECM either in over 36000 miles.   Electraglider_1997 Posted on Thursday, October 04, 2012 - 06:13 pm:        Jeepnh, The underseat rib is also vented. I did it to allow heat to vent out instead of dead end around the battery and ECM. I see you asked a question on the archive.   Mad_doctor Posted on Thursday, October 04, 2012 - 07:03 pm:        They were actually designed as vortice actuators for the BLACK uly. (otherwise they would be SO fast, you couldn't hang on to the bars)!   Jeepnh Posted on Thursday, October 04, 2012 - 09:20 pm:        Now some of you are screwing w/me, NP/ok, then the rest are just confused, I've seen elsewhere on here, folks putting PVC elbows, either on the underseat side on wheel /fender side. Seems a few folks are thinking venting ?? What say you? This photo is from someone else / Archive.   Natexlh1000 Posted on Thursday, October 04, 2012 - 11:36 pm:        Those aren't vents. Those the afterburners.   Uly_man Posted on Friday, October 05, 2012 - 03:58 pm:        No the top two are for the new "type AK-47 USB" wireless internet ports and the bottom two are urine drains for long distance touring. You will need the 02021:O-ME-NOW-TWAT HD kit to make it work though. 22.99 $ yes ONLY 22.99 $ call now on 0274-224-5532-441. Buy now and get a FREE set of brake pads for your S1 buell.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: