| Author | Message | ||
     Sleez |
not sure if it is for steel or aluminum swing arm. still new in the package. no idea what i paid, or what it is worth??? $75 OBO shipped???   | ||
| Sleez |
bump | ||
| Foximus |
Looks to be for aluminum swing arm, if you ask my opinion. | ||
| Charlies_s1 |
P.M. Sent | ||
| Loki |
one must have a deft foot and great feel when using a 4pot caliper on a S1. | ||
| Foximus |
I fail to see when you would even need the full use of the stock rear caliper? Rear braking is for chumps. | ||
| Sleez |
offer received, sale pending. | ||
| Sleez |
sale is off, need to figure out what this bracket is for exactly. | ||
| Sleez |
so, if i include a PM caliper for $400 shipped, any takers? | ||
| Foximus |
jes. =] Pic. | ||
| Sleez |
 | ||
| Brinnutz |
I've got to get mine mounted... | ||
| Sleez |
bump | ||
| Loki |
Sleez, Had one fitted in the stock S1 swing arm, then transferred it into my Metmachex. Also used one on my old RS swing arm. Fox, Stocker was fine. For my riding style, I wanted more control and feel. A four pot on the back aint for everyone though. I also got more bling to match the Metmachex swing arm and oil tank. | ||
| Sleez |
Loki, thanks so it appears this bracket has been used on the steel, aluminum and aftermarket swingarms. | ||
| Drixton |
Is this it? http://www.cas4.com/buell/Brakes/Buell%20Rear%20Br ake%20Calipers.htm | ||
| Sleez |
appears to be, yes. | ||
| Drixton |
If that means it can fit on a stock S1W swing arm and rotor and fit a 4 piston caliper with no modifications needed, then I'd like to make an offer. I'd first like to know what the caliper bolt spacing is so that I can confirm what calipers will fit. | ||
| Sleez |
PM 125x4R, 0052-2400 series, 3.5" mounting centers. the only unknown is the brake line. email from PM; Hi Lee, We offer the caliper in 5 different finishes, -P for polish -CH for chrome -B for all black -BM for contrast cut -SMB for Black ops. We have them all except for the Chrome one, chrome should be available in a couple days. Polish caliper retails for $302.45 All of the other finishes retail for $334.95 You can get them from us or thru a dealer. Thank you, (Message edited by sleez on September 30, 2012) (Message edited by sleez on September 30, 2012) | ||
| Sleez |
this one might work too; http://www.wilwood.com/Calipers/CaliperProd.aspx?i temno=120-7741 | ||
| Sleez |
or this one? http://www.speedwaymotors.com/Wilwood-4-Piston-Cal iper-for-235-Inch-Rotor,6697.html | ||
| Drixton |
PM sent. | ||
| Sleez |
sale pending | ||
| Loki |
Sleez, Pics sent | ||
| Loki |
The PM 125x4R caliper is a pretty common item. A lot of your chopper builders were using them. It can be used as a front or rear unit. | ||
| Sleez |
thanks Loki! | ||
| Loki |
no problem. Anyone else want pics in a steel arm or Metmachex sing out and Ill send them | ||
| Drixton |
i do! i do! both steel and metmachex | ||
| Loki |
pm me with a email addy | ||
| Sleez |
SOLD! |
