G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Ferrisanyoneseenferris Posted on Friday, September 28, 2012 - 10:43 am:        Thanks for any opinions! http://www.twistedthrottle.com/trade/productview/4 896/474/   Xbkris Posted on Friday, September 28, 2012 - 11:28 am:        Looks Sharp!   Arcticktm Posted on Friday, September 28, 2012 - 11:43 am:        That's a blank windscreen for the Madstad windshield system. There are a number of folks on here that have that system, with the same flyscreen (but with the holes in it for mounting the windshield). I am not one of them, though. I have the Palmer brackets, which are a slightly lower rent version.   Balloyd66 Posted on Friday, September 28, 2012 - 01:50 pm:        I use that windscreen with my Madstad system. Very sturdy and rigid. Took a bit of patience and finesse (flexing, pushing, pulling, etc.) to get the bolt holes lined up. So easy to cross-thread those bolts.   Ejbeert Posted on Friday, September 28, 2012 - 01:52 pm:        what arcticktm said i do have madstad system and memphis shades lowers and like it duck here it comes almost as quiet as my e-glide   Schwara Posted on Friday, September 28, 2012 - 01:59 pm:        I've got both that version (no holes) as well as the one that goes with the adjustable brackets. I love both. I've been using that one over the summer but will convert for a trip or as the weather starts to cool.   Cmgaviao Posted on Friday, September 28, 2012 - 02:00 pm:        Ejbeert, Never considered lowers before. do they make a lot of difference?   Djohnk Posted on Friday, September 28, 2012 - 04:24 pm:        I use that windscreen with my Madstad system. Very sturdy and rigid. Took a bit of patience and finesse (flexing, pushing, pulling, etc.) to get the bolt holes lined up. So easy to cross-thread those bolts. I ended up drilling out the six holes a little to get the screws to go in easier. I also was worried about cross threading.   Natexlh1000 Posted on Friday, September 28, 2012 - 05:15 pm:        My threads on the six mounting screws were crappy. I ended up chasing the threads with a tap. Now I can screw them in most of the way with my thumb and fingers. I guess they tapped mine in a hurry at the factory or just drove the screws in with a hammer   Fubar Posted on Friday, September 28, 2012 - 07:24 pm:        Ejbeert says.. "i do have madstad system and memphis shades lowers and like it duck here it comes almost as quiet as my e-glide" Yup. Sturdy piece and great with the Madstad/Zero Gravity set-up I have. Memphis Shades help even more with noi}se and high speed buffeting. Using anti-seeze helps with the difficult threads here and on the air box cover.   Ejbeert Posted on Saturday, September 29, 2012 - 07:44 am:        cmgaviao yup A search of bad web shows some differant options.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: