Author |
Message |
1125rcya
| Posted on Sunday, August 26, 2012 - 09:48 pm: |
|
I don't quite understand why no one in the US makes a lower fairing to work with the stock pods. |
Sprintst
| Posted on Sunday, August 26, 2012 - 11:06 pm: |
|
Besides BMC, you mean? |
1125rcya
| Posted on Sunday, August 26, 2012 - 11:46 pm: |
|
I don' t believe BMC sells them anymore. No similar to Trojan Horses style. The lower fairing that attaches to the lower portion of the pods. To pay shipping over sea is ridiculous. |
Sprintst
| Posted on Monday, August 27, 2012 - 08:38 am: |
|
You can still find a few dealers that have the BMC kit in stock, and I was able to order a replacement panel recently |
99buellx1
| Posted on Monday, August 27, 2012 - 12:45 pm: |
|
Those still aren't really a lower, they are more of a mid. I'm assuming that you are looking more for a full bellypan style? |
Nuts4mc
| Posted on Monday, August 27, 2012 - 01:06 pm: |
|
1125rcya - go here: http://www.airtech-streamlining.com/buell/1125R200 8.htm hope this helps |
Figorvonbuellingham
| Posted on Monday, August 27, 2012 - 02:07 pm: |
|
I wonder if that lower and bellypan combo fits the CR? |
Badgerbueller1125
| Posted on Tuesday, August 28, 2012 - 06:18 pm: |
|
How much would one be willing to pay for one of the factory lowers brand new in box w/ all mounting and heat shield and instructions? |
Christaylor
| Posted on Tuesday, August 28, 2012 - 10:18 pm: |
|
I'll throw out $250, shipping negotiable USPS, Paypal funds. And yes, if as described new in box with mounting hardware and they are black this is a firm offer. Chris |
Hardcorps
| Posted on Wednesday, August 29, 2012 - 03:33 am: |
|
PM sent |
Figorvonbuellingham
| Posted on Friday, September 21, 2012 - 12:43 pm: |
|
PM sent |
Hardcorps
| Posted on Tuesday, September 25, 2012 - 02:22 am: |
|
My lower fairings are still up for grabs. $250 plus shipping. I live in Michigan and the fairings are still in the original box. I can send pics upon request. I will eventually get around to putting these down in the classifieds. |
Figorvonbuellingham
| Posted on Tuesday, September 25, 2012 - 11:03 am: |
|
Pm sent |
Figorvonbuellingham
| Posted on Tuesday, September 25, 2012 - 11:20 am: |
|
Pm sent |
1125rcya
| Posted on Tuesday, September 25, 2012 - 12:17 pm: |
|
Thanks..I bought a complete race fairing set from flexi-glass. (Message edited by 1125rcya on September 25, 2012) |
Figorvonbuellingham
| Posted on Tuesday, September 25, 2012 - 12:33 pm: |
|
Dont think flexiglass with work on a CR |
Bob_thompson
| Posted on Tuesday, September 25, 2012 - 12:41 pm: |
|
"I don't quite understand why no one in the US makes a lower fairing to work with the stock pods." 1125rcya: my Catalyst Composites lower, one piece, work just fine with the stock pods but you have to fabricate brackets, cut out a place for the kick stand and paint. See my profile picture. These have been around since the first 1125R's. They were just $234.00 plus shipping when I bought them in 2008. |
Figorvonbuellingham
| Posted on Tuesday, September 25, 2012 - 01:15 pm: |
|
Hmm wish I had seen that before I paid $375 for this piece of trash Zas from a member. Looks like that would bolt onto a CR with some light fab work. |