Author |
Message |
Mke
| Posted on Thursday, September 13, 2012 - 09:07 pm: |
|
Does anyone still sell skidplates for the Uly? I don't see them on the touratech web site. |
Streetgliderx
| Posted on Thursday, September 13, 2012 - 10:36 pm: |
|
i have a cnc plasma machine and fab shop and if i could get some good measurements i could try to fab one up... |
Cmgaviao
| Posted on Saturday, September 15, 2012 - 01:54 pm: |
|
I've got a plate which i haven't mounted as I was going to see if my welder friend could come up with something to weld onto the front to make it cover the front of the muffler a little. I'll see if i can come up with some measurements... or i could send it to be copied if you'll cover the roundtrip shipping |
Streetgliderx
| Posted on Saturday, September 15, 2012 - 07:26 pm: |
|
some good measurements would be fine. if i was home id offer the round trip ticket but i aint near my machine or shop right now. but some rough measurements would help along with what you want modded, maybe a drawing? with cnc man possibilities is endless. also is the original one aluminum or steel? |
Erwin8r
| Posted on Saturday, September 22, 2012 - 12:48 pm: |
|
I'd be interested in a Touratech-type (that's the aluminum model with the round holes, right?) if you guys make one... Thanks! |
Mqracing
| Posted on Saturday, September 22, 2012 - 09:43 pm: |
|
Count me in as interested in a touratech type skid plate as well as the "front protector" panel that mated with the skid plate. |
Mke
| Posted on Sunday, September 23, 2012 - 04:36 pm: |
|
Now we just need to get an existing skidplate to model and perhaps Streetglider can get them cut. Let's get to work on this! Does anyone have access to a Touratech skidplate? |
Mke
| Posted on Sunday, September 23, 2012 - 04:41 pm: |
|
Annnnd I just found this post from a couple months back..... http://www.badweatherbikers.com/buell/messages/21/ 685802.html?1341576287 Anyone know the status of this project? |
Streetgliderx
| Posted on Sunday, September 23, 2012 - 08:25 pm: |
|
im currently out of town working but anyone who can get me some good measurements i can get some dxf.s drawn and get a couple prototypes cut from some thinner steel to test fit. once the design is ironed out its just a matter of loading aluminum instead of steel into the machine |