| Author | Message | ||
     Marine_wolf2003 |
I traded for a cyclone a year ago and had to try and make a front fairing do to lack of money and my uncle wanted to be creative, any im not happy with the result ill try to post a pic later, i was wonder in if any body had an extra front fairing or if any body had any ideas on a replacement setup | ||
| Psykick_machanik |
I have a front fairing off my 2000 X1 (red). i dont know if their the same pn# but id be willing to part with it, just PM me if your interested. | ||
| Rick_a |
Airtech Streamlining has relatively inexpensive fiberglass replacements. | ||
| Marine_wolf2003 |
Psykick i tried to pm you i would like to have it | ||
| Psykick_machanik |
Marine_ i replied to your PM. You still interested? | ||
| Marine_wolf2003 |
trying to shift some stuff around so i can buy it im paying for a wedding and a 6moth old right now lol | ||
| Marine_wolf2003 |
plus i just found out i need new isolaters i hate the guy who had this bike before me he didnt do anything | ||
| Kc_zombie |
Dustin, I sent you a PM on the isolators, let me know if they will fit and they will be on their way.. | ||
| Kc_zombie |
Dustin, your stuff goes out in tomorrows mail. Good luck! | ||
| Coxster |
saw a Givi on ebay a while back for $70 like mine, already painted yellow. Not gonna sing too many praises about a mini-fairing, but it does take some pressure off my chest | ||
| Psykick_machanik |
Dang man i'll give you the fairing and call it a wedding/kiddo present, not to mention a marine shouldnt have to pay for anything fun in my book. PM me your address. | ||
| Marine_wolf2003 |
Psykick if you need anything let me know and ill help in anyway i can that goes for you to Kc | ||
| Kc_zombie |
Thanks. Let me know if you need anything else (hardware, etc.) or have any questions. | ||
| Marine_wolf2003 |
Psykick did you get my pm with the address | ||
| Psykick_machanik |
yes i did. i'll get it in the mail this week, hopefully on Wed. | ||
| Jumbo_petite |
The Cyclone, S1 and X1 bikini fairings are all different. The Cyclone fairing the raised portion is in the center of the fairing, on the S1 it is on right side and the X1 is on the left side. The cluster shape determined where the raised section would be. | ||
| Psykick_machanik |
thanks Jumbo_ , i didnt realize they were completely different. Marine, what do you want to do? keep looking or try and mod the X1? | ||
| Marine_wolf2003 |
if its ok with you Psykick i think i will try to mod the X1 because either way it will look better then what i got right now | ||
| Psykick_machanik |
Not a prob, better you use it than it grow dust in my shed. might be easier to mod your dash. | ||
| Marine_wolf2003 |
thats kinda what i was thinking dash would be easyer | ||
| Jumbo_petite |
I may be wrong but buy a X1 dash and swap the clocks or use the X1 clocks | ||
| Marine_wolf2003 |
thats kinda what i was thinking | ||
| Psykick_machanik |
Ill send my old dash also. | ||
| Littlebuggles |
M2 tach and speedo are the same size and will fit right in an X1 dash. I've run that set-up on my bike since I bought it in '01, I dig the asymmetrical look of the Lightning dash and flyscreen. The X1 screen is a little taller than the M2, so I also noticed that I wasn't catching the wind blast in my gut when I switched those parts out. | ||
| Marine_wolf2003 |
sweet the next question is then how hard will it be to change my m2 over to having a tach as it didnt come with that option | ||
| Littlebuggles |
It's pretty easy, the stock M2 tach comes with three or four wires, with the metal pins crimped on, you just follow the speedo wires down, match up the colors on the harness under your tank on the receiving side and push the pins into the empty slots on the speedo side of the harness. I may have posted pictures up on badweb at some point, if not I've got some on a drive at home I can send... Now that I think on it I believe there is a ground, light, and signal wire is all for the M2. The X1 tach will also work, you'll have a spare wire for the fuel light and engine light, you would just tuck the ends back up inside the wire sheath to put them away and keep your wiring clean. | ||
| Marine_wolf2003 |
Hey rick what hand guards are those |
