| Author | Message | ||
     Buellish |
All prices include shipping in the US unless otherwise noted, See pics at: http://s1120.photobucket.com/albums/l500/buellish1/Tuber%20Parts/ X1 tank cover,Blue Racing stripe.Some small scratches. $75 X1 frame with title.Has scratches,nothing some rattle can black won't fix.$150 + shipping. X1 front forks complete with tripple trees and upper handlebar clamp.Some damage to the coating $200 + shipping. X1 tail complete. $70 Rotor $60 Stator $60 X1 race module part number N1306.K $125 X1 intake manifold w/injectors $65 X1 headlight fork mounts $35 shipped See pics at: http://s1120.photobucket.com/albums/l500/buellish1/Tuber%20Parts/ X1 bottom end with bad bearing.Only available for local pickup $150 Complete clutch, $160 Clutch ramp $20 Shift shaft $20 Clutch adjuster w/release plate $30 shipped Econowinder with K&N knockoff $30 Primary cover black wrinkle $100 Peg mounts front and rear w/one pair of pegs $35 Left side handlebar control $35 Right side handlebar control w/throttle & idle cables and pair of grips $50 See pics at: http://s1120.photobucket.com/albums/l500/buellish1/Tuber%20Parts/ X1 coil $30 X1 seat release $20 X1 seat $75 Derby cover,needs a polish $20 61 tooth pulley $35 Rear axle w/spacer,adjuster plates,washer and nut $55 Front Goodrich braided hose $30 Front wheel w/new bearings 1500 mi ago,black with some scratches but overall a good looking wheel $115 See pics at: http://s1120.photobucket.com/albums/l500/buellish1/Tuber%20Parts/ Rear wheel w/new bearings 1500 mi ago,black with some scratches overall a good looking wheel $170 Rear white wheel with powder coat removed from rim about 1 1/4" in,some scratches,needs a polish $150 Vance & Hines SS2R for X1 in rough shape,some damage to mount $50 X1 oil tank $30 S1 front pully cover and drive support arm $30 Steel swing arm $65 Swing arm mounting block $55 (Message edited by buellish on July 25, 2012) (Message edited by buellish on July 25, 2012) | ||
| Azrael_cervale |
I'll take the headlight mounts | ||
| Buellish |
Dennis PM sent. Sorry the picture links don't work.I'm trying to get them fixed. I also have an X1 side stand for $35 shipped. | ||
| Azrael_cervale |
Sweet now I just have to find a headlight and dash at a reasonable price. | ||
| Buellish |
Headlight mounts are sold. | ||
| Blackjoe |
What are the odds you have the throttle position sensor? Fingers crossed and holding my breath... | ||
| Buellish |
Sorry,no. | ||
| Buellish |
X1 bottom end is sold. (Message edited by buellish on July 30, 2012) | ||
| Buellish |
Also have an X1 sidestand $25 shipped | ||
| Buellish |
Vance & Hines muffler is sold pending payment. | ||
| Buellish |
Link to photos:http://s1120.photobucket.com/albums/l500/buellish1 /Tuber%20Parts/ | ||
| 6gears |
Hey Buellish... shot you a PM. | ||
| Red93stang |
Pm sent, interested in the triples | ||
| Buellish |
PM's sent. | ||
| Buellish |
The upper and lower triple trees are sold. The X1 forks are now available without the triples for $125 shipped. | ||
| Buellish |
X1 race module and V&H muffler are sold. | ||
| Buellish |
The Blue Racing Stripe tank cover is sold. | ||
| Wack01 |
still have ecm module | ||
| Buellish |
Look two posts above. | ||
| Madmacks |
got the bottom end a while ago, just never got back here to post...great crate you built, think I'll keep it for future storage. Thanks again Mike | ||
| Purpony |
could you pm me a price with shipping on the X1 frame to 06417 CT thanks | ||
| Buellish |
Glad you like the crate Tim. Marc,PM sent. | ||
| Dreamer1q |
Whats the seat condition? | ||
| Buellish |
The seat is in decent condition with no tears.Some of the black has rubbed off where your legs contact it but over all its in good shape. See a pic here:http://i1120.photobucket.com/albums/l500/buellish1 /Tuber%20Parts/NikonD-40094.jpg | ||
| Dreamer1q |
Gonna see if I can get this one recovered first, but thank you for the quick response and picture. | ||
| Dubsty13 |
Is the rotor for the front or rear?...Any idea on the condition before removal (like did it rattle)? and do you know if it will fit a 98 M2? Thank you. | ||
| Buellish |
The rotor is part of the charging system.It rotates around the stator to make AC voltage which is then converted by the regulator to DC voltage. Not much good in slowing the bike down. :-) | ||
| Buellish |
The Econowinder and seat release are sold. The tail section is now stripped of parts and for sale for $45 shipped.It has some scratches that would be tough to polish out.It would be a good candidate for paint or powdercoat. (Message edited by buellish on September 05, 2012) | ||
| Pontlee77 |
was this:X1 headlight fork mounts sold? | ||
| Buellish |
Yes they are sold. | ||
| Mplsx1 |
pm sent on tail section | ||
| Buellish |
pm back at ya |
