Author |
Message |
Buelldualsport
| Posted on Friday, July 06, 2012 - 06:52 pm: |
|
Anyone have the manufacturer and part number for a replacement clamp for the muffler? Had it somewhere when we had the 06 and 07. Can not locate it now. Thanks |
Djohnk
| Posted on Friday, July 06, 2012 - 07:50 pm: |
|
I bought this one recently: http://www.jmsonline.net/catalog/product/view/id/7 0011/ The shipping was about $11.50 so I bought two. At $4 each I wish I would have bought a couple more. I intended to have a back-up for road trips, but the first one broke right away. The second one has been on for about 3 months and has worked fine. It's for my '07 Uly on the front. It is almost too large, I have to tighten it until its almost closed all the way, but it works fine. |
Buelldualsport
| Posted on Friday, July 06, 2012 - 08:12 pm: |
|
Thank you What diameter did you purchase? Be safe |
Djohnk
| Posted on Saturday, July 07, 2012 - 01:59 am: |
|
That exact one, 6" to 6-5/16" |
Buelldualsport
| Posted on Saturday, July 07, 2012 - 10:03 am: |
|
Thank you |
Jessemc
| Posted on Saturday, July 07, 2012 - 10:34 am: |
|
I've got a muffler coming from mxdevon so I ordered four - it's always useful to have spares. Thanks for the link, Djohnk! Jesse |
Djohnk
| Posted on Saturday, July 07, 2012 - 12:31 pm: |
|
Just to be clear, I don't think the 6" to 6-5/16" size will work for the back two clamps (they are bigger). I reused the back two without a problem. I have read here on the forum that the front one is the one that breaks more readily. |
Jessemc
| Posted on Sunday, July 08, 2012 - 07:02 am: |
|
Djohnk - Just to be clear, I don't think the 6" to 6-5/16" size will work for the back two clamps (they are bigger). Thanks for the heads up. I reused the back two without a problem. I have read here on the forum that the front one is the one that breaks more readily. I'm planning on reusing the rear clamps since a number of folks posted that they can be reused if not mishandled or abused. Thanks for confirming that it worked for you, Djohnk! Jesse |
Cyclonedon
| Posted on Sunday, July 08, 2012 - 11:44 am: |
|
this guy has them for sale. I think you've heard his name mentioned before and might even know him! http://www.erikbuellracing.com/store/models/xb12.h tml |
Uly_man
| Posted on Sunday, July 08, 2012 - 01:50 pm: |
|
"I'm planning on reusing the rear clamps since a number of folks posted that they can be reused if not mishandled or abused." I have always reused them with no problems. They seem like a quality part to me. I think the trick is to position them right and NOT over tighten them. Remember as the can heats up it will make the bands tighter. This bike has some of the BEST quality parts I have ever seen on a bike. It also has some rather lesser parts as well. Not many though. But as with all things if you treat them right you should have few problems. |
Houwtama
| Posted on Monday, July 16, 2012 - 01:16 pm: |
|
Does anyone know the size of the rear clamp? |
Motorfish
| Posted on Tuesday, July 17, 2012 - 05:46 am: |
|
I just bought front clamps at the local trucking supply house, 5 bucks a piece. I don`t know the rear size,though. |
Pontlee77
| Posted on Tuesday, July 17, 2012 - 02:05 pm: |
|
I have the D&D clamps that are far better than the stock ones |